Our
Gold Brush Plating Solution has been formulated to be one of the
hardest wearing and fastest gold brush electroplating solutions
available. This fact, coupled with its fantastic coverage makes it our
best selling product. We incorporate a preservative into the mix which
gives it a very long shelf life leaving the gold in the the solution and
not at the bottom of the bottle as with some other gold plating
chemicals.
Tech Specs:
Operating Conditions and Deposit Data
| Voltage Range |
3 – 5 volts
|
| Temperature |
14 – 25 °C |
| Gold Concentration |
8 g/l |
| Electrode |
Platinum or Carbon (see notes) |
| Gold content in plate |
99.9% (balance carbon) |
| Plating Rate at (3.5 volts, Platinum electrode) |
Approx. 0.5 micron per minute (spot) |
| Hardness |
220 – 230 Hv |
| Density of deposit |
19.3 g/cm3 |
| Stress |
Medium stress |
| Special storage requirements |
Away from sunlight |
| Shelf life |
1 – 2 years |
| Health and Safety classification |
Harmful |
| Special considerations |
Contains potassium cyanide (0.3%) |
| Transport (UN number) |
None: Not classified as dangerous for transport |
Notes:
- We strongly advise against the use of stainless steel anodes for most of our plating processes
Gold content: 8 grams per litre
This is a Genuine Spa Plating Solution
Spa Plating has over 30 years experience in electroplating
this Solution is suitable for Brush electroplating only and you need a power supply(will not work without power) and other plating equipment to use this Solution