White PVC uPVC Flat Infill Door Panel  780mm X 950mm. Cut to size free of charge

• Size: 780 x 950mm
• Thickness: 20mm, 24mm or 28mm
• Colour: Standard white (We cannot guarantee that the white will exactly match your door)
  
• Easy to cut and fit.
• Foam filled for outstanding thermal insulation
• 10 year colour fast guarantee (will not go pink)
• Reinforced with 4mm MDF if applicable
  
• Can be cut to size free of charge. We can also cut out for cat flaps and dog flaps etc. in the panel.

How do I measure and fit a uPVC flat panel?

• First remove the beading the holds the glass or Upvc panel in place. The beading can be removed by pushing a stiff putty knife or similar into the beads leading edge, gently easing the bead out (start in the middle of the longest lengths). It's often a good idea to mark the beads top, bottom, left and right as the bead sizes can vary slightly.
• With the beading removed gently remove the glass or panel (this can often be a two handed job)
• Measure the panel thickness; this should be either 20mm, 24mm or 28mm thick
• Measure the height and width of the panel you wish to replace
• Order your panel making sure to order the correct thickness from the drop down menu above.
• Once your panel arrives you will need to trim the panel to the size measured earlier.
• Mark the panels width and height with a pencil, cut to size using a hand or jigsaw (use a fine tooth saw or blade to prevent chipping and remember panels should be cut in temperatures above 12 deg C.).
• Important before fitting remember to remove the protective film on both sides of the panel.
• Once cut the panel can be pushed into place and the beading clipped back into place using a soft headed hammer (remember fit long lengths first)

• Scroll near the bottom of listing to find our business contact information (VAT registered business)