This item includes:
4 PCS Nema 23 Stepper Motor single shaft with 270 oz-in,3A holding torque,4 Leads ,57BYGH627,
4 PCS Stepper Driver with 4.2A DQ542MA, 50VDC, 128Microsteps,
2 PCS Power Supply for 350W,36VDC,
1, Stepper Motor
Technical Specifications
Part No.: 57BYGH627 single shaft
Frame Size: NEMA23
Step Angle: 1.8 degree
Voltage: 3.0VDC
Current: 3.0
Resistance: 1.0 Ohm/phase
Inductance: 3.5 mH/phase
Holding torque: 19
Rotor inertia: 480
Detent torque:
Number of wire leads: 4
Weight:
Length:
Black A+
Green A-
Red B+
Blue B-
Please tell us if you need Double shaft or single shaft, we can manufacture both for you. If you need Double shaft, please tell us your requirements for length of front and rear shaft, as well as the diameter. So that we can offer you the quite good products, thanks!
2, Stepper Motor Driver with 4.2A Current, DQ542MA
DQ542MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with
Features:
l High performance, low price
l Average current control, 2-phase sinusoidal output current drive
l Supply voltage from 18VDC to 50VDC
l Opto-isolated signal I/O
l Overvoltage, under voltage, overcorrect, phase short circuit protection
l 15 channels subdivision and automatic idle-current reduction
l 8 channels output phase current setting
l Offline command input terminal
l Motor torque is related with speed, but not related with step/revolution
l High start speed
l High hording torque under high speed
Electrical specification:
Input voltage |
18-50VDC |
Input current |
< 4A |
Output current |
|
Consumption |
Consumption:80W; Internal Insurance: |
Temperature |
Working Temperature -10~ Stocking temperature |
Humidity |
Not condensation, no water droplets |
gas |
Prohibition of combustible gases and conductive dust |
weight |
|
3, Power Supply
350W/36VDC,9.8A