With This Kit You Can
Mount a single beer faucet into a refrigerator wall or door, carbonate and serve your own beer from a brand new 5 gallon keg. The Ball Lock keg fittings match most 5 gallon homebrew beer kegs. A dual gauge Co2 Regulator & Co2 tank supplies gas to carbonate, preserve and push the beer for serving. All hoses and accessories that you will need are included. See below for a list of all included components, and specifics about each item.

• New 5 Gallon Ball Lock keg. These kegs are constructed of stainless steel, there is a large oval lid that makes it easy to clean inside. The Ball lock style fittings are by far the most widely used connection in the Homebrewing community.
• New 5 lb. Aluminum Co2 Tank - All of our tanks are brand new and recently certified, this certification lasts 5 years, at which point it just needs to be re-certified by your local Co2 supplier. Due to federal regulations Co2 Tanks must ship empty and therefore must be filled or exchanged before use.
• Commercial Double Gauge Co2 Regulator - Our regulators feature a convenient knob style pressure dial that can be adjusted without tools. With dual gauges you have one that shows the remaining pressure in the tank, and one that shows the pressure going to your keg. Regulator includes chrome shutoff with built in spring loaded check valve to prevent beer from flowing backward into the gas lines. Connection to tank is sealed with ultra durable delrin gasket. When connecting off of this line you can tee off for multiple kegs or you can connect multiple regulators together so that pressure to each keg can be individually set. This is nice for convenience but generally a little bit of overkill unless you really learn how to utilize that type of system.(Regulator style may vary from picture due to supply)
• Gas and Liquid Ball Lock Style Keg Connectors – These quick disconnect couplers make switching kegs a snap! They can be easily taken apart for cleaning or sanitizing. Get one pair with each tap in your kit.
• Chrome plated 4-1/2" Long Shank with Nipple - The shanks are measured from the end of the barb to where the faucet attaches so a 4 1/2" shank will fit a maximum wall thickness of 3 1/4" through a 1" bore. The hose connects directly to the shank with a stainless hose clamp. This style of shank is a bit tougher to dis-assemble but since there is no beer nut required you gain an extra 5/8" of possible wall thickness. The chrome plated finish is durable, attractive, and works with most beverages. SPECIAL NOTE: If you are going to serve wine, ciders, or sour beers you will need to upgrade your system to the 100% Stainless Steel beverage contact option.
• Chrome Plated Faucet with Brass Lever - This premium quality faucet features a forged brass body with a highly polished chrome finish. This faucet has a brass shaft assembly and lever with a nylon ball washer that ensures smooth operation. The brass lever has standard threading that is compatible with most branded tap handle. Comes with 3" black plastic handle.
• Heavy Duty faucet spanner wrench - Used for connecting or removing a beer faucet from a shank.
• 5/16" x 9/16" Co2 Line Hose - 5' Heavy duty Co2 gas tubing with 1/8" wall thickness.
• 3/16 " x 7/16" Beverage line - 5' Heavy Duty beverage tubing with 1/8" wall thickness will not impart any off flavors or aromas in your beer, remains flexible even when cold and resists kinking.
• Accessories - Complete assembly instructions, Stainless steel worm drive clamps