35W
DC Car Headlight HID Xenon Conversion Kit Slim Ballast
Bulb Types: H1 H7
H3 H8/H9/H11 9005/HB3/H10 9006/HB4 880/881/H27 5202/H15
H13 H4/9003 9004/9007
Color temperatures: 3000K,4300K,5000K,6000K,8000K,10000K,12000K
|
Gallery Picture |
|
Why Choose Our Digital HID Conversion
Kits? |
|
Why choose our Digital HID Conversion kits?
-
100% Plug and Play design
-
Our product comes with a 3 year warranty and easy installation.
We stand behind our hid kits with support and service like other
company.
-
We offer a wide range of options
including 11 bulb sizes, 7 different colors and 2
types of ballasts. Not only do we sell the
conversion kits, but all the accessories needed for
proper installation on most vehicles.
Specifications
|
Voltage Input |
9-16V |
Voltage Norm. |
13.2V |
Current Norm. |
3.6A |
Current in Max |
10A |
Power Output |
35W |
Working Temperature |
-40 ~ +105 Centidrgee. |
HID Efficiency |
98.68%, 3, 200 LM. |
Life-Span |
3, 000 hours |
Certification
|
E4 & ISO-9001:2000 Approved |
Xenon HID Kit Quality Control Passed:
-
6 hours continuous working aging test.
-
Connection circuit protection test.
-
Short circuit protection test.
-
Lack of voltage protection test.
-
over voltage protection test.
-
Flash light concussion test.
-
Quakeproof capability test.
-
cold, warm boot test.
-
Polarity protection test.
-
EMC anti-jamming
test
|
|
Detail Description |
What is HI/LO
Bi-Xenon?
-
This will depend on the type of vehicle you drive. For most
vehicle, the headlights have 2 bulbs each: one for low beams
and one for high beams. In this case, you will need one
regular HID kit for the low beams. If you also want your
high-beams to be HID lights, you will need a second regular
HID kit.
-
On some other vehicles, the headlights have one bulb each.
This bulb performs the function of both the high beam and
low beam. In this case, if you want to keep the high beam
and low beam functions, you will need to install a special
HI/LO kit. The HI/LO HID kits have special bulbs that
perform both high and low beam functions.
-
A Bi-Xenon bulb replaces a H4 halogen bulb
that produces low beam as well as high beam. A H4 halogen
bulb has therefore two filaments, one for low beam and one
for high beam. The Bi-Xenon bulb however, only has one
'light cell'. (See The Pic. Below)
-
By means of an ingenious electro-magnetic
construction, this light cell can change position. One
position is low beam, the other is high beam.
|
HID Temperature
and Color |
The color of light is measured and expressed in degrees Kelvin (K).
The color spectrum ranges from a red to purple. HID headlamps do
not have this wide of a range though there are different bulbs
that skew toward either extreme. Most are more focused on the
center of that range.
4,300K is the temperature that is closest to natural daylight.
Factory HID headlamps are setup for this color temperature.
Conventional Halogen filament bulbs are yellowish which is
equivalent to a 3,300K temperature. 6,000K has a bluish tint and
temperatures above that are increasingly blue shifting to a
purple tint.
Color Temperatures Available: 3000k,
4300k, 5000k, 6000k, 8000k, 10000k, 12000k
|
Our
Benefits of Slim Ballast |
Slim Ballasts use smaller internal
components and still offer the same input and output power as
its standard sized version. With the Igniter unit in an epoxy
filled chamber, we are able to reduce the size of the core unit
by roughly half, also reducing the weight significantly. Slim
Ballasts are easier to mount, weigh less, and allow users to
install their HID systems faster with less time spent under the
hood, and more time enjoying their HID lights!
|
Installation Guide |
- Step
1: Open hood and locate the factory light bulb you
are trying to convert. If fog lights, you may need to pull
out your factory fog light housing to access the back. On
some vehicles you can access factory bulbs from the engine
bay or from the wheel wells with your wheels fully turned on
direction. Please consult your owners manual or dealer on
how to access your factory light bulbs. In 90% your bulbs
are easily removed without too much trouble. Once your
factory light bulb is removed, you can prepare for the HID
bulb insertion.
- Step
2: Remove the plastic capsule preinstalled on the HID
bulb and insert into your headlight socket. HID bulbs should
fit similar to your factory light bulb, but the tolerances
may be slightly different on certain vehicle models. Bulb
installation will vary from twisting to clamping from the
back depending on the bulb type. Be very gentle with the HID
glass portion. Do not touch the glass with your fingers. If
it does end up getting dirty, simply wipe with clean cloth
gently.
-
Notice: Some vehicle models may
require adapters for the bulb to fit into the socket. These
include H7 bulbs. Some parts off of your original headlight
may be be required depending on car model. Example, 9007
light bulbs will require the reinstallation of the plastic
bulb holder adapter. Some car will
require a metal adapter or plastic adapter to hold the bulb
in place.
-
Step 3a: Once the HID bulb is
fixed into place locate the factory connector where the
original halogen bulb was connected to. You will now connect
the supplied wire (may be a plug or 2 metal tips) that you
must insert into your factory connector as shown below. When
we say factory connector, this is the connector your
original bulb was feed power with.
- If you purchased a Bi-xenon
kit, or a kit with relay, your installation will be a little
different than above. See steps 3b or 3c.
- Step
3b: If your kit included a relay you will not use the
provided extra wires shown in Step 3a. that connect ballast
to factory headlight plug. Instead the ballast get connected
to the relay as shown below. The relay then will connect to
your factory headlight plug. Some relays will have two plugs
one for each side, while others only one headlight plug.
Remember a relay simply gets a signal from your headlight
plug, then allows power to flow directly from your battery.
- Step
3c: If your kit purchased is a bi-xenon kit also
known as hi/low (low beam + high beam HID with movement).
This only applies to kits with bulb types 9004 9007 H4 H13
9008. Notice on these kits there will be only 1 headlight
plug connector. One of your headlight connectors may not be
used.
- Step
4: Before mounting ballast permanently please test
the system. Low beam, high beam and fog light function if it
applies to your install. It is best to turn the vehicle on
to test the system as some vehicles do not give full voltage
when vehicle is running only from battery.
- Step
5: Mount the ballasts on any existing bolt or flat
surface away from excessive heat. We do not recommend
mounting on top of the radiator or in front or behind it.
Ballasts are electronic devices which excessive heat can
ruin. Make certain the wires with your kit cannot get
tangled into the belt line or are resting on very hot
components of the engine.
|
Shipping & Handling |
-
We ship to your
Paypal registered address only!
-
Items will be shipped within 24
hours on payment received.
All items are shipped from China using Post Airmail, Please
allow 25-35
days for your order to arrive due to International shipping.
-
If you do not receive your item
after 35
days. please contact us immediately for further
assistance. We will be responsible for any damages or losses
incurred in the shipping process.
-
Import duties,
value added taxes and any other charges are NOT included in
the item price or shipping costs. As an eligible
importer, you are responsible for any reasonable tax or any
other importation fees.
|
Payment Method |
-
PayPal Only.
-
We ship to your Paypal registered address
only.
-
Item will be shipped out within 1 - 2 working days once we have received your payment via PayPal with
confirmed shipping address only
-
Warm Tips: Import duties, value added taxes and any other charges are not included, as an eligible importer, you are
responsible for any reasonable tax or importation fees.
-
We are absolutely
NOT responsible for any import tax or Customs duty
|
Refund and Return |
-
If the quality of your purchase does not meet your expectations or your satisfaction
-
Returned items must be unused and undamaged.
-
We carefully inspect returned items upon receipt before issuance of refunds, credits, or exchanges. Please allow up to 10 business days for us to process your return.
|
About US |
-
We are a professional exporter in LED Light, Electronic Products, Digital Products etc, in Hongkong. Our company is a large-scale Trading Company as well as manufacturer who is integrating the production, sale and after service. Our factory is founded in 2008, outfitted with advanced production equipment, adopted to modern production technology, our products are exported throughout the world. Because of first-class quality, our products are welcomed wonderfully.
-
"Customer comes
first" is our service goal, "Keep promise and honor contract" is our business principle. "Faster, higher and further" is our target. Going with these three, we are never satisfied with current results, never stop processional steps, but continue to self-perfect, develop and bring forth new ideas. With these work spirits, our company has made incredible breakthroughs these years.
-
In the modern competitive import and export Trading markets, we are so confident to meet any challenges. We have prepared well, Welcome to your friendly business.
|