HDMI 30Pin LVDS Parallel Controller Board Module Monitor Kit for Raspberry PI 2 5.6" - 42" IPS TFT LCD Display Panel

Notice:Please kindly let us know your lcd model number first by sending us the aliexpress message before you place the order, So we can check if we can program the controller board for you, Then we can prepare correct kit for you urgently.Thanks.

LCD Model Support:5.6" - 17" inches LCD display panel, Mostly of the lcd panel with a LVDS interface that resolution is lower than 1920x1080P, Easily plug & play, No need soldering.

  This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor. It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves. 

   How to find a right lcd model number? Please check the following picture.......

Necessary accessories for turning a bare LCD to desktop monitor:

LCD controller board, VGA cable/HDMI /AV/LVDS cable, Output  voltage 12V-2A/3A/4Apower adapter. If you have already had a VGA/HDMI/AV cable and a power adapter (Ouput 12V,2A/3A/4A --), This kit is a great choice for you, Else there are some other kind of kits for options in our store, Click here:

Specification:

1   1*HDMI input, Support HDMI1.2 version

2   Output voltage of panel requirement: 5V/12V-2A.

3   6PIN,7 Extra high voltage board

4   LVDS output,6/8/double 6/double 8 LVDS ( for 3.3V/5V/12V Input Voltage of the LCD Display Panel)

5   5-button switch and adjustment panel

6   Led backlight power

7   LVDS input

8  Size:73*52*1.6mm

Package includes:

1 HDMI LVDS Controller Board Module

1 10 Pin Cable

1 Keyborad

Important Steps to Process your order with this kit:

   Step 1: Please provide your LCD panel model no. by sending us the ebay message before bidding this item, so that we can advise a right kit for your LCD.  (Usually, the model no. can be found on a sticker on the back of the LCD panel. If needed, disassemble the plastic shell and you will find the sticker）. If possible, please give us as more specification of your LCD as you can. Then wait for our reply.

   Step 2:   We will give you the reply as soon as possible after carefully selecting and testing the kit by our technical support, and then you can place the order, and pay for it. We will send the package via HongKong Post as soon as possible after cleared payment. (If you prefer express shipping, please contact us to pay additional shipping cost before payment.) 

   Step 3:  Waiting for the package.

   We will write corresponding program into the lcd controller board to match your LCD, so this kit will match against one very specific LCD Panel or others that have exactly the same specification. However, a programmer could help on different LCDs, that is, change the firmware of the LCD controller board by yourself. Be aware that different LVDS cables and Inverters will be needed to match different LCDs. 

   Notes:

   1. Please make sure that your LCD is ok before bidding this item, else you will be responsible for the incompatibility. 

  2. If you concern much about resolution setting, please reconsider before bidding!

  3. We will try our best to prepare the right kit for you, such as writing the corresponding program into the controller board, selecting the suitable LVDS cable and the suitable inverter. But as we don't have an LCD exactly as yours at hand, we can just test the controller with our own LCD. For yours, you need to test it yourself to check if it works well or not. As you know, there are so many LCDs with many varieties in the market, sometimes we can't promise the exact compatibility. Please consider it before bidding! However, we have gained many success in preparing the kit for our customers in real store. So why not have a try to get surprise!

  4. If you are not specialized in electronics or have doubts in operation, please contact us for instruction, as we are not able to responsible for wrong operation.

  5. After finishing the connecting, please don't rush to power on! First, use multi-meter to test whether the GND of the LCD is connected with the GND of the controller board. If not, please check the connection again. If yes, please test whether there is a short circuit between the red wires and black wires of the LVDS cable. If there is a short circuit, it means opposite connection or other errors. Any problem, please feel free to contact us. DIY needs a certain professional knowledge, please kindly take the responsibility of the risk. No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.

Our Successful Customer's Project For your refer:

  For the below LCD models. We can make a full kit for you. However, no matter your model no. is listed in the table or not, welcome to contact us for more details, we probably will be able to find the solution for you as we did this job more than 6 years already. 

Payment:

• We accept Paypal Only.
• Payment must be received in 7 business days of auction closing.
• Please contact us if you have any question of payment procedures.

Shipment:

1)Delivery time:

1. We will send the item within 1-3 working days when we get your payment. (Except holiday)

2. Please make sure your ebay address is updated and detailed. And if you want to change your shipping address after you place order, please let us know first time. Thank you!

3. After we sent the goods, we will email you the shipping information, as well as tracking number.

2) Shipping time: 

1.Generally , most countries shipping time are as below , due to variation of postal service in different areas , some areas may take longer. If you met problem , welcome free fell contact to us , we will reply you soon .

2.Deliver to Russian Federation usually takes about 45-60 days.Please be aware of the long lead time before you order

Returns&Refund:

1. We do our best to serve our customers the best that we can.

2. We will refund you if you return the items within 15 days of your receipt of the items for any reason. However, the buyer should make sure that the items returned are in their original conditions.  If the items are damaged or lost when they are returned, the buyer will be responsible for such damage or loss, and we will not give the buyer a full refund.  The buyer should try to file a claim with the logistic company to recover the cost of damage or loss.

3. The buyer will be responsible for the shipping fees to return the items.

Warranty & Maintenance:

1. We offer the 1 month free replacement.  Buyers may request for a replacement within 15 days from your receipt of the product. The buyer should return the product in the original conditions to us and should bear the shipping costs for return. 

2. We also provide 12-month free maintenance.  The buyer should return the product in the original conditions to us and should bear the shipping costs for return.  If any part is required to be replaced, the buyer should also pay for the costs of the parts to be replaced.

3. Before returning the items, please confirm the return address and the logistics method with us. After you give the items to the logistic company, please send us the tracking number.  As soon as we receive the items, we will repair or exchange them ASAP.

Feedback:

Your satisfaction and positive feedback is very appreciate.  Please leave positive feedback and 5 stars if you are satisfied with our items and services.

If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback.  We will do our best to solve any problems and provide you with the best customer services.