Atmel Camelia 1.6M industrial camera with Nikon F-mount. Although resolution is not very high - pixels are very large: 19.5x19.5um and sensor is pretty large too - almost 35mm film size: 30x20mm. These were used with film scanner. LVDS interface. Monochrome 1024x1536 pixels resolution (attention: this is portrait/vertical frame - when I tested cameras I made a mistake - entered these pixels as if it was usual horizontal frame - couldn't understand what was wrong - cost me extra time and money buying yet another grabber to realize this...) I downloaded CommCam settings software from archived Atmel website. It works with Windows 7 64-bit (older version CommCam 6.5 works with this camera, newer version 8 doesn't).There is separate connector for COM port (null-modem) cable on camera back. Sensor is Full Frame - that means it has to be used with mechanical shutter or Flash or you'll get get washed picture with raining highlights. Shutter/flash triggering could be problematic - because there is no separate TTL I/O - only differential LVDS. I would recommend to test camera with longer exposure - like 2 seconds - which is longest exposure with internal triggering. With shutter speed this long you might avoid Full-Frame artifacts. Original Y data cable is included - feel free to re-do it for your grabber. 24V power adapter and Null Modem cable are also included.