Fitment Notice: 2015 - 2024 Freewheeler
Our lift kit brackets were originally designed for the Tri-Glide for more ground clearance between the rear fenders and the tires, along with an added clearance of 1 & 5/8 inches between the bottom trailing tips of the stock exhaust and the pavement. By placing our Lift Kit Brackets on your Freewheeler, you will not only benefit from the same results which keeps the trike from squatting too much when adding a passenger or additional loading, but a mentionable difference has been brought to our attention by previous customers that the handling of the Freewheeler has also improved.
Important Information: There has been inquiries about the reasons for having a 1/2 X 13 inch threaded nut welded onto the 3/8 inch steel bracket. The steel thickness of the bracket that the shock mounting bolt passes through is 3/8's of an inch. The lower shock mounting bolt is a 1/2 inch in width.
By Rule of Engineering Standards, the bracket should also be a 1/2 inch thickness. However, the thickness application of the bracket must remain at 3/8's of an inch. So in turn, a 1/2 x 13 inch nut must be welded to the bracket to ensure the required strength of where the lower end of the shock will mount.