Provides multi-season antifouling protection against all types of marine fouling organisms.
When
the time comes to apply new antifouling paint to your boat’s hull, the
job will be a lot easier it you have been using Micron CSC. This is
because compared to hard antifouling paints, Micron CSC’s ablative
formula wears away or “self-polishes” in a controlled fashion as the
boat is used. Controlled polishing reduces the build-up of old
coatings—which minimizes the need for laborious sanding at haulout.
And
compared to hard antifouling paints, Micron CSC is also better for the
envinment. This is because it uses less copper more efficiently than
traditional, hard antifouling paints.
Boats painted with Micron
CSC can also be hauled, stored and relaunched without a loss of
antifouling effectiveness—which means you can paint in the fall and
splash in the spring!
Key Features
- Fast-drying formula
- Antifouling performance for all fouling waters
- Suitable for powerboats and sailboats
- Multi-season protection
- Self-polishing formula reduces paint build-up
- Reduces need for sanding prior to repainting
Physical Data
- Vehicle type: Copolymer ablative
- Finish: Matte
- Available colors: Blue, Green, Red, Black, Shark White, Dark blue
- Components: 1
- Curing mechanism: Solvent release
- Solids by Volume: (Theoretical): 58%
- Coverage: 440sq.ft./gal.
- VOC: 370 grams/liter (as supplied)
- Active ingredients: 37.2% Cuprous oxide
Application
- Application Method: Brush, roller, airless, or conventional spray
- Number of coats recommended: 2-3 Minimum per season with additional coats for extended service. Bare wood: 3 coats (first thinned)
- Wet Film Thickness: 3.4 mils/coat
- Dry Film Thickness: 2 mils/coat
- Applicator: High-quality short nap roller (maximum 3/16” nap)
- Application temperature: Min. /Max. Range: 10°C/50°F and maximum 35°C/95°F.
- Thinner: 216, Model 117598 or 433, Model 203679
Size: Quart
Color: Black
Part Number: 5583Q