AC 110V 220V Digital LCD 10A 100A Watt Power Meter Volt Amp Ammeter Voltmeter + CT

• A. Function
• 
  
• 1.Electrical parameter measurement function (voltage, current, active power, energy)
• 2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
• 3. Power alarm threshold preset function (can set power alarm threshold).
• 4. Reset energy function.
• 5. Store data when power off.
• 6. STN whole viewing angle LCD (display voltage, current, active power/energy at the same time)
• 7. Backlight function.
• 
  
• B. Appearance and Key function
• 
  

• I. Display Interface

  The large-screen STN whole viewing angle LCD can display voltage, current, power, energy at the same time.(note: power and energy display can be switched by the key.)

  II.Display format

  1. Power: test range: 0~2.2kW

  within 1KW, the display format is 0.0~999.9W;

  1KW and above, the display format is 1000~2200W.

  2. Energy: test range: 0~9999kWh

  Within 10KWh, the display format is 0~9999Wh;

  10kWh and above, the display format is 10~9999kWh.

  3. Voltage: test range: 80~260V

  Display format: 80~260V

  4. Current: test range: 0~10A

  Display format: 0.00~10.00A

•      III. Key

  1. Backlight control

  Short press the key "light bulb"to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.

  2. Reset energy

  Step1: Long press the key "Set"for at least3 seconds until the number in energy display area flash, then release the key.

  Step2: If short press the key "Set"again, then the energy value is cleared and exit the reset state.If short press the key "light bulb"again, then the energy value will not be cleared and will exit the reset state. If there is no operation on the key within 10 seconds, the energy value will not be cleared and will exit the reset state.

  3. Set power alarm threshold

  Step1: Long press the key "light bulb" at least 3 seconds until the number in power display area flash,then release the key

  Step2: Power area display the current power alarm value and the last digit begin to flash, then you can short press the key "set" to plus 1, short press the key "light bulb" can switch the digit which you want to set. The threshold can’t be over 2.5kw( note: the default value is 2.5kw).

  Step3: After finish the setting, long press the key "light bulb" over 3 seconds or there is no operation over 10 seconds, it will store data automatically and exit the set state.

  4. Power/Energy switch

  You can short press the key "set" to switch display the power/ energy, the display state will be store when power off.

• 
  
• C. Precautions
• 
  
• 1. This module is suitable for indoor, not outdoor
• 2. applied load can not exceed the rated voltage and current.
• 3. The wiring order can not be wrong.
• 
  
• D. Specifications
• 
  
• 1. Working voltage: 80V ~ 60VAC
• 2. Test voltage: 80 ~ 260VAC
• 3. Rated power: 2.2KW
• 4. Measurement accuracy: 1.0

• 1 *AC 110V 220V Digital LCD 10A/100A(+CT) Watt Power Meter Volt Amp Ammeter Voltmeter

• We process your order within 1 business day upon payment(note: NOT counting holidays or weekends).
• International shipping also available, please note by default all international packages does not come with tracking unless upgraded to priority mail.
• Package transit time: please expect 3-5 business days within US, 5-10 business days to Canada, up to 20 business days all around the world.

• Please read the item description and check the pictures carefully before bidding. Return or refund is available only if item DOA or there's error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any.
• Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost.