This listing is for 50MHz , model: FY6650
1, FY6600 using a professional 14Bit high-speed D / A chip, rather than a few cheap resistors built 12-bit D / A resistor network. The higher the resolution, the smoother the detail of the waveform. It is recommended to use the oscilloscope to reduce the amplitude resolution and time base to observe the details of the sine wave, the two programs of the waveform details and smoothness will immediately vividly on paper.
2, FY6600 series sampling rate upgrade to 250MSa / s, at the same frequency than the 200MSa / s sampling rate of the instrument waveform outline a lot;
3, FY6600 series of each group of waveform storage depth upgrade to 8192 * 14bits, high-precision restore the signal details. Wave length is friends 4 times.
4, the industry is very useful VCO function, see the characteristics of the introduction.
5, FY6600 series of phase resolution of up to 0.1 degrees, the user can more accurately control the two-way signal delay;
6, the signal output terminals using pure copper material, not the plastic wrapped zinc alloy material, the details is the attitude;
7, the instrument uses imported long life button, feel comfortable;
8, the first dual-channel waveform at the same time in the LCD operation interface display (non-friends imitate our version of 2015, only one channel)
9, 4 TTL output, the application of the instrument more widely;
10, small signal is particularly good, FY6600 can output 1mVPP small signal, the amplitude resolution of 1mV, and can do 1mVpp, 10mVpp, 100mVpp, 1Vpp and other different step value, the maximum range of 1mVpp ~ 20Vpp Promise The
11, the frequency range is wider, the maximum frequency range of sine wave is 1uHz ~ 60MHz, the maximum range of square wave 1uHz ~ 25MHz, other wave frequency range 1uHz ~ 20MHz, full range frequency resolution 1uHz, full range frequency regardless of file, direct digital setting ;
12, square wave within 5 seconds rising edge time as low as 7nS, the maximum output frequency up to 25MHz;
13, the waveform is more abundant, the instrument not only for the user preset 33 kinds of commonly used waveform, but also provides users with up to 64 groups (8192 * 14Bit) user-defined waveform storage space, the user can use my company's host computer It is worth mentioning that our pulse pulse width not only supports the duty cycle adjustment mode, but also supports the pulse width between 20nS-1S precise setting (imitate our interface of the Friends of the product is not equipped with this adjustment Way). Instrument output waveform total of 97 groups.
14, a powerful scanning function, the instrument not only supports the internal parameters set the signal frequency, amplitude, duty cycle, bias level parameters of the scan, but also supports external analog voltage on the instrument output frequency, amplitude, duty cycle The modulation of the level;
15, the measurement function is more comprehensive, the instrument can signal the frequency, cycle, positive pulse width, negative pulse width and duty cycle measurement, and all parameters displayed in the same interface, do not need to flip back and forth; counter function with DC And the exchange of two coupling methods, an effective solution to the case of AC coupling count is not allowed. Instrument maximum measurement frequency up to 100MHz, the minimum measurement frequency of 0.01Hz.
There are some advantages we are not listed, and welcome to communicate with everyone
Frequency
|
||||||||
Model
|
FY6600-12M
|
FY6600-30M
|
FY6600-50M
|
FY6600-60M
|
||||
Sine
|
0~12MHz
|
0~30MHz
|
0~50MHz
|
0~60MHz
|
||||
Square
|
0~12MHz
|
0~25MHz
|
0~25MHz
|
0~25MHz
|
||||
Ramp/Triangle
|
0~12MHz
|
0~20MHz
|
0~20MHz
|
0~20MHz
|
||||
Pulse
|
0~12MHz
|
0~20MHz
|
0~20MHz
|
0~20MHz
|
||||
TTL
|
0~12MHz
|
0~20MHz
|
0~20MHz
|
0~20MHz
|
||||
Random
|
0~12MHz
|
0~20MHz
|
0~20MHz
|
0~20MHz
|
||||
Resolution
|
1μHz (0.000001Hz)
|
|||||||
Accuracy
|
±20ppm
|
|||||||
Stability
|
±1ppm/ 3hours
|
|||||||
Impedance
|
50Ω±10%(Typical)
|
|||||||
Phase Range
|
0~359.9°
|
|||||||
Phase Resolution
|
0.1°
|
|||||||
Waveform Characteristics
|
||||||||
Waveforms
|
Sine, Square (Duty Cycle adjustable), Pulse (Width can be set accurately), Triangle/Ramp, Rise Sawtooth, Fall Sawtooth, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step, Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone, Noise, Electrocardiogram (ECG), Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, and other 64 sets customer-defined waveform.
|
|||||||
Waveform Length
|
8192 Dots
|
|||||||
Sampling Rate
|
250MSa/s
|
|||||||
Vertical Resolution
|
14 Bits
|
|||||||
Sine
|
Harmonic Suppression
|
≥45dBc(<1MHz);≥40dBc(1MHz~20MHz);
|
||||||
Total Harmonic Distortion
|
<0.8% (20Hz~20kHz,0dBm)
|
|||||||
Square
|
Rise/Fall Time
|
≤10ns(VPP<5v)
|
||||||
Overshoot
|
≤5%
|
|||||||
Duty Cycle
|
0.1%~99.9%
|
|||||||
Sawtooth
|
Linearity
|
≥98% (0.01Hz~10kHz)
|
||||||
Output characteristics
|
||||||||
Amplitude
|
Frequency≤10MHz: 1mVpp~20Vpp;
10MHz<Frequency≤30MHz: 1mVpp~10Vpp,
Frequency>30MHz: 1mVpp~5Vpp
|
|||||||
Amplitude Resolution
|
1mV
|
|||||||
Amplitude Stability
|
±0.5%/ 5 Hours
|
|||||||
Amplitude flatness
|
±5%(<10MHz);±10%(>10MHz);
|
|||||||
Waveform Output
|
||||||||
Impedance
|
50Ω±10%(Typical)
|
|||||||
Protection
|
All channels can work more than 60 seconds when the load is short-circuited.
|
|||||||
Dc Offset
|
||||||||
Offset Range
|
Frequency≤30MHz: ±10V; Frequency>30MHz: ±2.5V
|
|||||||
Offset Resolution
|
1mV
|
|||||||
TTL Output
|
|
|||||||
Electrical Level Amplitude
|
>3Vpp
|
|||||||
Fan-out
|
>8 TTL LOAD
|
|||||||
Rise/Fall Time
|
≤10ns
|
|||||||
CMOS Output
|
||||||||
Low Electric Level
|
<0.3V
|
|||||||
High Electric Level
|
1V~10V
|
|||||||
Rise/Fall Time
|
≤20ns
|
|||||||
External Measurement
|
||||||||
Frequency Meter
|
Range
|
0.01Hz~100MHz
|
||||||
Sensitivity
|
Gate Time 3 grades(1S, 10S, 100S) adjustable
|
|||||||
Counter
|
Range
|
0-4294967295
|
||||||
Coupling
|
DC , AC
|
|||||||
Working Mode
|
Manual
|
|||||||
Voltage Input Range
|
2Vpp~20Vpp
|
|||||||
Pulse Width measurement
|
Resolution 5 nS. Max. 10S
|
|||||||
Period Measurement
|
Resolution 5ns,Max. Limit 10s
|
|||||||
Sweep
|
|
|||||||
Sweep Type
|
Linear or Logarithm
|
|||||||
Sweep Objects
|
Frequency, Amplitude, Offset, Duty Cycle
|
|||||||
Sweep Time
|
0.01S~999.99S/Step
|
|||||||
VCO Input
|
0~5V
|
|||||||
VCO Objects
|
Frequency, Amplitude, Offset, Duty Cycle
|
|||||||
Parameters Range
|
Starting position and Finishing position can be set arbitrarily.
|
|||||||
Sweep Range
|
Decided by Parameters setting.
|
|||||||
General Specifications
|
||||||||
Display
|
Mode
|
2.4 inch TFT Color Lcd.
|
||||||
Save & Load
|
Amount
|
20
|
||||||
Position
|
01 to20 (01 for default value)
|
|||||||
Interface
|
Type
|
USB to Serial interface.
|
||||||
Communicating Speed
|
9600bps (Industrial standard)
|
|||||||
Protocol
|
Command line mode, protocol complete open.
|
|||||||
Power
|
Voltage
Range
|
AC100V~240V
|
||||||
Technic
|
SMD, LSI, Reliable and durable
|
|||||||
Buzzer
|
Can be turned on/off by setting.
|
|||||||
Operation
|
Buttons and knob continuously.
|
|||||||
Environment
|
Temp.:0~40℃ Humidity:﹤80%
|
|||||||
Dimension
|
200mm (Length)×190mm(Width) ×90mm(Height)
|
|||||||
Weight
|
Machine(700 g),Accessories(150 g)
|
|||||||
package :
1pc FY6612Mhz Dual Channel DDS Function Arbitrary
1pc power line
1pc usb line
1pc BNC line
1pc Q9 line
1pc cd