ESP-12E/12F ESP-12S WiFi Development Board Shield Adapter WeMos D1 Nodemcu CH340
Name | Picture | Details |
ESP-12S Module | Fetures: Model:ESP8266-12S
ISM 2.4GHzPA +25dBm 802.11b/g/n |
|
ESP-12E Module |
ISM 2.4GHz PA +25dBm 802.11b/g/n |
|
WeMos D1 ESP-12E | Based on ESP-8266EX Arduino compatible, using Arduino IDE to program 11 x I / O pins 1 x ADC pin (input range of 0-3.3V) Support OTA wireless upload Onboard 5V 1A Switching Power Supply (highest input voltage 24V) |
|
ESP-12F Module |
|
|
ESP-12 Module |
Model:ESP8266-12
|
|
ESP-12 WeMos D1 |
This is D1 mini, it is a mini WIFI board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) a Micro USB connection |
|
ESP-12 Wifi Module | Working voltage: 4.5V - 5.5V (On-board 3.3v LDO Regulator) Working current: 240mA(MAX) Serial port baud rate: 115200 (default), can be modified to other values by AT command Serial communication format: 8N1 |
|
ESP-12F Nodemcu |
|
|
ESP-12F(Blue) | 1. Uses CH340G instead of CP2102. 2. NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for 3. superior stability on all supported platforms. 4. Communication interface voltage: 3.3V. 5. Antenna type: Built-in PCB antenna is available. 6. Wireless 802.11 b/g/n standard 7. WiFi at 2.4GHz, support WPA / WPA2 security mode 8. Support STA/AP/STA + AP three operating modes |
|
ESP-12F/12E Adapter | Power supply voltage: 5V - Module operating current: 240mA (max) - Baud rate: default 115200, can be modified by AT command - Wireless network mode: station / softAP / SoftAP + station - Wireless standard: 802.11 b / g / n - WIFI @ 2.4 GHz, support WPA / WPA2 security mode |
|
ESP-12E Board | Power supply voltage: 5V - Module operating current: 240mA (max) - Baud rate: default 115200, can be modified by AT command - Wireless network mode: station / softAP / SoftAP + station - Wireless standard: 802.11 b / g / n - WIFI @ 2.4 GHz, support WPA / WPA2 security mode |
|
ESP-12F Board | Power supply voltage: 5V - Module operating current: 240mA (max) - Baud rate: default 115200, can be modified by AT command - Wireless network mode: station / softAP / SoftAP + station - Wireless standard: 802.11 b / g / n - WIFI @ 2.4 GHz, support WPA / WPA2 security mode |
|
ESP8266 Adapter Plate |
Typ :ESP8266 Serial Wireless WIFI Module Adapter Plate
Application : for ESP-07 ESP-08 ESP-12
|