https://pswtradesuppliers.co.uk/allegro/ebay/szablon/ufo%20ludek.gif

https://pswtradesuppliers.co.uk/allegro/ebay/szablon/817-1335.jpg

https://pswtradesuppliers.co.uk/allegro/ebay/szablon/817-1354.jpg

https://pswtradesuppliers.co.uk/allegro/ebay/szablon/817-1353.jpg

PRODUCT DESCRIPTION

UnderFloor Heating Kit Water 80 - 85 m2

High-performance, multi-layered Pex-Al-Pex pipe
This 16-mm Pex-AL-Pex 5-layer tube outperforms older PEXB and PE-RT pipes in all respects.
Pex-Al-Pex pipes are widely used for potable water and underfloor heating.
Approved by UNI-EN-ISO, AENOR-certificate, WRAS APPROVED PRODUCT certificates.
This tube has been tested and obtained a certificate of full acceptance WRAS OF THE UK -
a rigorous testing procedure that certifies only the highest quality products.
WRAS approval means that the product can be used in all domestic hydraulic applications
in Great Britain including drinking water installations as well as in central heating and UFH systems.For central heating and underfloor heating systems

Some of the sellers sell similar kit for less.Please note they offer less pipe with their kit.Also they do not offer electric valves known as actuators.
It's recommended to use as much pipe as possible.The purpose of it is to
even floor temperature as the flow and return lie adjacent to each other.
That's leave fewer cold spots.
That's save your energy required to heat the floor.

complete manifold(pipe connection,isolating valves,automatic
air vent,pressure gauge,flow meters)

electric valves
It's very important to use them with your manifold.
Every one of them control one circle.

if you are looking for an other sizes then click here

Check our other sizes:

This kit include below products:

600m of 16mm pex barrier pipe

6port complete manifold

(16mm pipe connection,isolating valves,automatic

air vent,pressure gauge,flow meters)

6 electric valves

(only comes in kit with thermostat)

It's very important to use them with your manifold.

Each one of them control one circle.

one circulating pump

one blending valve

room thermostat of your choice

600 pipe staples

10m long pipe insulation one blue and one red

Pipe insulation is to use with a pipe to insulate a pipe and to mark flow and

return

50m perimeter edge insulation

It's recommended to use as much pipe as possible.The purpose of it is to

even floor temperature as the flow and return lie adjacent to each other.

That's leave fewer cold spots.

That's save your energy required to heat the floor.

The rules is:

1sqm floor =7m pipe

Size Chart

SAS803WHL-7 Thermostat for valve actuator.

SAS803WHL-7 is a 7-day programmable thermostat designed for floor warming application or helping to limit
floor temperature. This thermostat can conform to water heating system.

SPECIFICATION:
Power source ……………………… 100-240VAC 50/60Hz
Relay contact:…………………………250VAC 3A
Room temperature setting range……5℃ to 70℃
Floor temperature control range…… 5℃ to 70℃
Accuracy……………………………… ±0.5℃
Dimensions……………………………86mm X 86mm X18mm
Color……………………………………White

FEATURE:
 Large LCD display
 Permanent user setting retention during power loss,
 The thermostat has an intelligent recovery function that brings your room temperature to the set
temperature at exactly the pre-set time by turning on the Heating earlier.
 Optional economic operation or comfort operation
 Optional type of control for different heating application including room thermostat; floor thermostat or room
thermostat with floor limitation
 Optional programming Period: 7 individual day or Separate 5-day (weekday) and 1-day/1-day
(Saturday/Sunday) programming with 6 or 4 separate time/temperature periods per day.
 Display temperature recalibrates
 Anti-freezing protection

The installation and design guide of UFH below

See all other our auctions: PSWtradesuppliers LTD

Komentarze

Page "about me"All auctions