● It is HC-05 Bluetooth module Slave and master two in one module with Cable.

● Operating voltage: 3.3V

● Working current: matching for 30 MA, matching the communication for 8 MA.

● Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.

● Potter default rate of 9600, the user can be set up.

● With computer and bluetooth, bluetooth adapter, PDA, seamless connection equipment.

● Dormancy current: no dormancy.

● Input power supply 3.3~6V, Prohibit more than 7V.

● Commercial Series: Bluetooth module board Series

● With LED indicator light, use 150mA and 3.3V regulation chip.

● With VCC, GND, TXD, RXD foot for the Bluetooth

● With "Re-search" button (ON/OFF/WAKE foot for it , external MCU out input "High level" can control module to re-search)

● Compatible with bluetooth master module", slave module" or master-slave (whole) module.

● Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.

● No "Automatically prevent power supply peversing func", so please correctly connect power supply

● Size:4.2cmx1.5cm/1.65"x0.59"

HC-06

Module: JY-MCU HC-06 (SLAVE)

Module Dimensions: 42.0mm x 17.0mm x 8.5mm (including header pins)

Pin Pitch: 2.54mm

Effective Distance: 10m (open area)

Supply Voltage: 3.6~6v (do not exceed 7v)

Interface level: 3.3v (Can directly connect a variety of SCM 51, AVR, PIC, ARM, MSP430, etc.  A 5v microcontroller can also be directly connected without MAX232)

Input current: 30-40mA (pairing) / 8mA (communication)

Temperature Operating Range: -25 °C to +75 °C

Interface: VCC, GND, TX, RX (4-Pin)

Default Bluetooth Pairing Code: 1234

Bluetooth Protocol: 8 data bits, 1 stop bit, no parity

Default Baud Rate: 9600

Wireless Bluetooth Frequency: 2.4GHz

LED Indicator: Bluetooth connection status (Flashes when disconnected, permanently on when paired and connected)

Applications:

·  Bluetooth data transfer

·  Bluetooth GPS, compass, temperature sensor and other remote sensor data transfer via Bluetooth

·  Control of Arduino development board via Bluetooth

Module base