All paints are airbrush ready. By nature all
paint may vary in consistency based on pigment. You may find some paints to be
slightly thicker than others which are natural properties of paint. We do not
add any additional additives to our paints which results in no shelf life , hard
settles or breakdown.
MMP paint is very easy to use. We recommend thinning to the following ratio for
the best performance. Below are some basic examples. For best performance
please follow our carefully researched ratios.
DO NOT MIX 50/50. Our thinner is very powerful and only the smallest amount of
thinner is needed. In the mixing cup your reduced paint will appear thicker
than what you may be used to. This is normal. MMP paint will dry smooth, thin
and level. It will not hide the finest of details. Mixed properly you will find
a beautiful opaque finish which requires minimal coats.
All paint should be stirred not shaken in the
paint cup.
Polyurethane Intermix
1-2 drops to 10 drops paint ( Stir in only do not shake )
2-4 drops to 20 drops paint ( stir in only do not shake )
Thinner / Reducer
20/30% MMP thinner to 1 part paint ( 2/3 drops thinner to 10 drops paint)
20/30% MMP thinner to 2 part paint ( 2/3 drops thinner to 20 drops paint )
PSI 10 , 15 , 20 depending on your needs.
TIP: add one or two drops of MMP Polyurethane Intermix for additional reduced
tip dry when spraying straight from the bottle. MMP Poly increases flow ,
lowers drying times , added leveling , increased blending when brush painting,
durability and adds a slight eggshell finish. As modelers we highly recommend
this as an option.
|