• Features: 
     
  • 1. Improved LCD display, more intuitive to adjust the various parameters.
    2. Dual USB output, this solar charge controller can simultaneously charge or supply power to two mobile phones, tablet PCs and other devices that require 5V power.
    3. Using series PWM main charging circuit, effectively improve the charging efficiency.
    4. Light control and delay function.
    5. Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.
  •  
  • Safety Instructions: 
     
  • 10/20/30A 12V 24V Solar Panel Charger Controller Battery Regulator LCD Dual USB

    Features: 
     

    1. Improved LCD display, more intuitive to adjust the various parameters.
    2. Dual USB output, this solar charge controller can simultaneously charge or supply power to two mobile phones, tablet PCs and other devices that require 5V power.
    3. Using series PWM main charging circuit, effectively improve the charging efficiency.
    4. Light control and delay function.
    5. Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.

     

    Safety Instructions: 
     

    1. Make sure your battery has enough voltage for the controllers to recognize the battery type (12 V / 24 V) before installation. 
    2. The battery cable should be as short as possible to minimize loss. 
    3. The regulator is ONLY suitable for lead acid batteries: OPEN, AGM, GEL. (NOT suitable for lithium batteries, Ni-MH battery) 
    4. ONLY suitable for working with photovoltaic solar panels. (NOT for other DC or AC power source) 

     

    System Connection:
     

    There could be some slight differences in the color tone of the pictures and the actual item.
    1.Connect the battery to the charge regulator plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
    2.Connect the photovoltaic module to the regulator plus and minus.
    3. Connect the consumer to the charge regulator plus and minus. The reverse order applies when deinstalling!

     

    Specifications:
     

    • Battery Voltage: 12V / 24V (Auto Detect)
    • Charge Current: 10A/20A/30A
    • Working Temperature: -35℃ to +60℃
    • Application: Home, Industrial, Commercial
    • Self consume: ≤10mA
    • Float Charge: 13V
    • Discharge stop: 10.7V
    • Discharge reconnect: 12.6V
    • 12V battery can only access 18V-20V solar panels
    • 24V battery can only access 36-40V solar panels
    • 10A (12V120W (MAX) 24V/240W(MAX))
    • 20A (12V/240W(MAX) 24V/480W(MAX))
    • 30A (12V/360W(MAX) 24V/720W(MAX))

     

    Note: 
    1.An improper sequence order can damage the controller.
    2.This controller can only be used on lead-acid batteries

     

    Packing List:
     

    1 x Solar Charge Controller
    1 x Manual



    10/20/30A 12V 24V Solar Panel Charger Controller Battery Regulator LCD Dual USB

    Features: 
     

    1. Improved LCD display, more intuitive to adjust the various parameters.
    2. Dual USB output, this solar charge controller can simultaneously charge or supply power to two mobile phones, tablet PCs and other devices that require 5V power.
    3. Using series PWM main charging circuit, effectively improve the charging efficiency.
    4. Light control and delay function.
    5. Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.

     

    Safety Instructions: 
     

    1. Make sure your battery has enough voltage for the controllers to recognize the battery type (12 V / 24 V) before installation. 
    2. The battery cable should be as short as possible to minimize loss. 
    3. The regulator is ONLY suitable for lead acid batteries: OPEN, AGM, GEL. (NOT suitable for lithium batteries, Ni-MH battery) 
    4. ONLY suitable for working with photovoltaic solar panels. (NOT for other DC or AC power source) 

     

    System Connection:
     

    There could be some slight differences in the color tone of the pictures and the actual item.
    1.Connect the battery to the charge regulator plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
    2.Connect the photovoltaic module to the regulator plus and minus.
    3. Connect the consumer to the charge regulator plus and minus. The reverse order applies when deinstalling!

     

    Specifications:
     

    • Battery Voltage: 12V / 24V (Auto Detect)
    • Charge Current: 10A/20A/30A
    • Working Temperature: -35℃ to +60℃
    • Application: Home, Industrial, Commercial
    • Self consume: ≤10mA
    • Float Charge: 13V
    • Discharge stop: 10.7V
    • Discharge reconnect: 12.6V
    • 12V battery can only access 18V-20V solar panels
    • 24V battery can only access 36-40V solar panels
    • 10A (12V120W (MAX) 24V/240W(MAX))
    • 20A (12V/240W(MAX) 24V/480W(MAX))
    • 30A (12V/360W(MAX) 24V/720W(MAX))

     

    Note: 
    1.An improper sequence order can damage the controller.
    2.This controller can only be used on lead-acid batteries

     

    Packing List:
     

    1 x Solar Charge Controller
    1 x Manual


    Item Specifics
    Brand Unbranded
    MPN Does Not Apply
    Country/Region of Manufacture Unknown

    Payment

     

    2. You can checkout and pay immediately after the auction ends or you complete the purchases. If you need an eBay invoice sent to you by Email, please contact us before making payments.

    1. This is the payment method we can accept: Paypal

    2. You can checkout and pay immediately after the auction ends or you complete the purchases. If you need an eBay invoice sent to you by Email, please contact us before making payments.

     

    Shipping Policy

    1.We will ship to your eBay address. Please make sure your eBay address is correct 

    before you pay.

    2.We will ship out your order within 2 business days after receiving your verified payment (Excluding Weekends and Public Holidays)! 

    3.For US Buyer, We will ship out your order via USPS/UPS. It will take 4-7 business days to you. If you can't track your parcel or didn't receive your parcel, please kindly contact with us.

     

    Return Policy

    1.If you are not satisfied with our products. Please kindly contact us before you open the return request. We provides 30 days Money Back or Exchangement Warranty. 

    2.Please Kindly contact us for the RMA No.and address before returning the item back.

     

    Contact Us

    1. Please contact us if you are not satisfied with the item after receive it. Just contact us using the " Ask the seller a question" link on eBay. 

    2.All replies will be sent to your email, if you don't get response within 1-2 business days, pls check your My messages' in case your email provider has an overly-aggressive spam filterblocking eBay's emails. Please email us AGAIN.Thanks

     

    Free Shipping
    10/20/30A 12V 24V Solar Panel Charger Controller Battery Regulator LCD Dual USB

    Features: 
     

    1. Improved LCD display, more intuitive to adjust the various parameters.
    2. Dual USB output, this solar charge controller can simultaneously charge or supply power to two mobile phones, tablet PCs and other devices that require 5V power.
    3. Using series PWM main charging circuit, effectively improve the charging efficiency.
    4. Light control and delay function.
    5. Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.

     

    Safety Instructions: 
     

    1. Make sure your battery has enough voltage for the controllers to recognize the battery type (12 V / 24 V) before installation. 
    2. The battery cable should be as short as possible to minimize loss. 
    3. The regulator is ONLY suitable for lead acid batteries: OPEN, AGM, GEL. (NOT suitable for lithium batteries, Ni-MH battery) 
    4. ONLY suitable for working with photovoltaic solar panels. (NOT for other DC or AC power source) 

     

    System Connection:
     

    There could be some slight differences in the color tone of the pictures and the actual item.
    1.Connect the battery to the charge regulator plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
    2.Connect the photovoltaic module to the regulator plus and minus.
    3. Connect the consumer to the charge regulator plus and minus. The reverse order applies when deinstalling!

     

    Specifications:
     

    • Battery Voltage: 12V / 24V (Auto Detect)
    • Charge Current: 10A/20A/30A
    • Working Temperature: -35℃ to +60℃
    • Application: Home, Industrial, Commercial
    • Self consume: ≤10mA
    • Float Charge: 13V
    • Discharge stop: 10.7V
    • Discharge reconnect: 12.6V
    • 12V battery can only access 18V-20V solar panels
    • 24V battery can only access 36-40V solar panels
    • 10A (12V120W (MAX) 24V/240W(MAX))
    • 20A (12V/240W(MAX) 24V/480W(MAX))
    • 30A (12V/360W(MAX) 24V/720W(MAX))

     

    Note: 
    1.An improper sequence order can damage the controller.
    2.This controller can only be used on lead-acid batteries

     

    Packing List:
     

    1 x Solar Charge Controller
    1 x Manual


    Payment

     

    2. You can checkout and pay immediately after the auction ends or you complete the purchases. If you need an eBay invoice sent to you by Email, please contact us before making payments.

    1. This is the payment method we can accept: Paypal

    2. You can checkout and pay immediately after the auction ends or you complete the purchases. If you need an eBay invoice sent to you by Email, please contact us before making payments.

     

    Shipping Policy

    1.We will ship to your eBay address. Please make sure your eBay address is correct 

    before you pay.

    2.We will ship out your order within 2 business days after receiving your verified payment (Excluding Weekends and Public Holidays)! 

    3.For US Buyer, We will ship out your order via USPS/UPS. It will take 4-7 business days to you. If you can't track your parcel or didn't receive your parcel, please kindly contact with us.

     

    Return Policy

    1.If you are not satisfied with our products. Please kindly contact us before you open the return request. We provides 30 days Money Back or Exchangement Warranty. 

    2.Please Kindly contact us for the RMA No.and address before returning the item back.

     

    Contact Us

    1. Please contact us if you are not satisfied with the item after receive it. Just contact us using the " Ask the seller a question" link on eBay. 

    2.All replies will be sent to your email, if you don't get response within 1-2 business days, pls check your My messages' in case your email provider has an overly-aggressive spam filterblocking eBay's emails. Please email us AGAIN.Thanks

     

    DataCaciques