Store category

Sign Up Now !

You may also like

Four in one DC 100V/100A LCD Digital Voltage Current Power Meter Ammeter Voltmet

Product Description

A. Function

1. Electrical parameter measurement function (voltage, current, power, electricity).

2. Voltage alarm function (more than the voltage alarm threshold, backlight and voltage flashing tips).

3. Power button clear function.

4. Power-down data storage function.

5. Large-screen LCD full-screen LCD display function (also shows the voltage, current, power, power).

6. Backlight function.

B. Display and button

two. UI

Display by the large-screen LCD screen at the same time display the voltage, current, power, power parameters.

three. Display format

1. Power: test range of 0 ~ 10kW

1kW within the display format 0.0 ~ 999.9W;

1kW above display format 1000 ~ 9999W.

2. Power: Test range 0 ~ 9999kWh

10kWh within the display format 0 ~ 9999Wh;

10kWh above display format 10 ~ 9999kWh;

3. Voltage: test range 6.5 ~ 100V

Display format 6.50 ~ 99.99V

4. Current: Test range 0 ~ 100A

Display format 0.00 ~ 99.99.

three. button

1. Backlight control

The backlight can be turned on or off with a short press of the button, and the backlight is automatically saved when the power is off.

2. Clear power

Step 1: Press and hold the key until "CLr" appears in the power display area, then release the button;

Step 2: At this time, the power flashes to indicate that the battery is in the state of zero power. If you press the button again, the power data will be cleared and the flashing status will be cleared.

Step 3: If there is no key operation within 5 seconds, it means that the battery data will not be cleared and exit the clear state.

3. Voltage alarm value settings

Step 1: Press and hold the key until the "SET" character is displayed in the power display area, then release the button;

Step 2: After entering this state, the voltage area displays the current high voltage alarm value. The current area displays the current low voltage alarm value and the lowest bit starts flashing. At this time, the bit can be pressed by pressing the button. When there is no key operation When the voltage is over 3 seconds, it will automatically switch the adjusted bit, from high-voltage alarm value to low-voltage alarm value, a total of 6, the voltage alarm threshold setting range is 6.5 ~ 99.9V;

Step 3: After the setting, press and hold the key until "PASS" appears on the screen to indicate that the setting is successful and exit the setup state automatically.

4. Range selection

Step 1: Press and hold the button until "Curr" appears in the power display area, then release the button;

Step 2: At this time, the current area will display "100A", press "100A" and "50A" to switch between 100A / 75mV and 50A / 75mV. This table can only use these two specifications shunt.

Step 3: Press and hold the button until the setting state is exited or no key operation is performed for 3 seconds, and the setting state is automatically saved.

C. Precautions

1. This module is suitable for indoor use, can not be used outdoors.

2. The load can not exceed the rated voltage, current.

3. Wiring order can not be wrong.

D. Specifications

3. Working voltage: 6.5 ~ 100VDC

4. Test voltage: 6.5 ~ 100VDC

3. Rated power: 100A / 10000W

4. Measurement accuracy: 1.0

 

We accept Paypal .
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.

We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

 

We appreciate positive feedback . we always try our best to service every customer . If you have any question,feel freely to contact us,we are always here to offer help .
 
 
All items will be shipped within 1~2 business day after payment. by China post or Singapore post or HK post,
   
Order valus more than $25, we provide free tracking number, order value less than $25, customer need to pay $2 if need tracking number
 
Ship to address provided by ebay if no special notes from buyer .
Delivery Time: Normally, It Takes About 10-30 Business Days to Arrival for most countries.
5-14 days to USA.
10-25 days to Australia / Canada.
14-30 days to major cities in Europe .
4 - 8 weeks to Italy , Brazil ,Russia.
 
However, it may delay due to industrial strike action, severe weather, custom reasons or peak seasons
 
we specialized in international business for more than 8 years We are professional in international business.
 
We work with Reliable international post service company.we can make sure you can get your items in time
 
We package every parcel very carefully. All items will be tested before shipped.We promise you will get your items in good situation.We seek for long term .
 
Mian business
We selling items with high quality and best price .We mainly selling ICs, electronic component ,electronic modules. PCB board etc
 
We also have customer to find other items that do not selling in our store .pls contact us if you need ,we can always provide the best price.
PushAuction

DataCaciques