Remote start your vehicle off your existing factory remote by hiting lock 3x!
Pre-programmed and ready to use/install right out of the box!
Installs with one simple T harness, That's it! 1 key to program unit. It's that simple!!!
Preloaded / Prewired ready to install module & T-Harness combo for your vehicle.
This customized RS Kit is the ultimate Factory Fit,
ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start
interface with T-Harness combo module for modern canbus controlled vehicles. It
raises the standard of hassle-free installation convenience to a whole
new level. It uses a multiple bus architecture with 10 separate
communication ports that provide more complete functionality on every
supported vehicle.
To start the vehicle with our kit simply hit the lock button 3X on your
factory remote, that's it! The installation of this product will require
anywhere from 2 to 6 wiring connections depending on how you want to
configure the system per your liking. We will provide precise directions
with wire colors and locations in the manual and in additional info
upon request. Please note: A person with a good basic knowledge of
wiring 12 volt car electronics should be able to install this product
successfully - Our remote starts are ONLY compatible with AUTOMATIC
transmission vehicles. We also sell manual trans setups, Email for more
info regarding those if interested. Wire ties and t-taps are also
included to complete your installation.
Precool in the summer and preheat the vehicle in winter
Choosing the right remote start system and installing it in your
vehicle has become a lot simpler and more affordable with this
all-in-one Fortin EVO-Series package. The EVO system includes a
digital interface module, which bypasses your vehicle's immobilizer
circuits so you can start it without a key, and a T-harness that'll
connect the module to your specific vehicle.
Vehicle-specific harness simplifies the installation
While not quite plug-and-play, the harness connections cut down
installation time considerably, so you do-it-yourselfers out there can
save a little money. Fortin includes a code on the package that you use
on their website to download and print detailed, illustrated
instructions for your installation.
Use your factory remote
You start your vehicle by pressing the lock button on your factory
key three times. This system lets you start your car from as far away as
the key will lock and unlock your doors.
- This is a genuine Lessco product
prewired and designed specifically for the vehicle listed. All the prep
work is done, Leaving you you more time to enjoy your new remote
starter!
- Activates from existing Factory
Remote. (VEHICLE MUST HAVE OEM KEYLESS ENTRY) Press the lock button on
the OEM Remote 3 times to activate remote start function. Free
proprietary copyrighted text style wire code sheet available upon
request, Just ask. Please note the year make and model and key/starting
method type.
- Latest firmware guaranteed, FREE Phone technical support available as well with purchase.
- Upgradable to extended range kits and/or smartphone module (only when using the fort2 t harness, not the for3, if applicable).
- Printed as well as electronic
delivery of the installation guide will be sent to you after checkout.
Easy install typically 2-6 connections depending on your preferences.
Have more questions about features and functionality?
Look here: https:://fortin.ca/en/products/evo-combos/
EVO Features:
- 3x on-board LEDs for simplified programming and diagnostics.
- 1x preloaded firmware for maximum compatibility.
- 4-wire
Fortin 2-way datalink port for data-to-data (RS-232) communication with
datalink equipped remote-starters and security-systems.
- 20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
- Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly
Communication Ports
- 3x CAN-Bus controllers.
- 3x General purpose controllers (J1850, Class 2, encrypted key etc.).
- 2x On-board Relays (SPDT).
- 1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
- 1x TB control port for TB-series modules
THAR Features:
- EVO-ALL T-Harness for the vehicle
- T-Harness connectivity with EVO-ALL to your vehicle
- T-Harness connects directly at the ignition column for plug-and-play installation for remote-starter
- Some wires may still need to splice/cut to complete installtion
**
T-Harness may not complete installation and some wires may need to be
hard wired into vehicle similar to a typical car starter install.
** Check manufacturers web site to make sure your vehicle is compatible with this system
Product Features
- 3x on-board LEDs for simplified programming and diagnostics
- 1x preloaded firmware for maximum compatibility. [1]
- 4-wire Fortin 2-way datalink port for data-to-data
(RS-232) communication with datalink equipped remote-starters and
security-systems. [2]
- 20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
- Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
Frequently Asked Questions:
--** DIY BASIC INSTALLATION KNOWLEDGE REQUIREMENT **--
The
installation of this product will require wiring connections. We
provide concise directions with wire colors & locations. It is
important to note at a minimum, a person with a basic to intermediate
knowledge of wiring car electronics should be able to install this
product successfully.
What about the instructions?
The
remote start and interface module both come with installation manuals.
What other parts will I need?
None. The kit comes
with all the components you will need. The only things you'll need to
provide basic supplies like electrical tape wire ties and basic electrical tools.
How long?
A pro installer can do this in a couple of hours. Your results may vary.