新建网页 1
Description:
- Features:
RC absorption circuit module used on protecting the relay or thyristor
because it can avoid damage that from inductive electromotive force
generated by the inductive load when on or off. Preventing electromagnetic
interference and increasing the anti-jamming capability of the
microcontroller.
For AC or DC 5 ~ 400V inductive load (less than 1000W), protection relay
contacts or thyristor.
RC absorption circuit,absorb induced electromotive force that from inductive
load.
With varistor, to prevent excessive fluctuations in voltage or current is
too large and resulting in relay contact adhesion.
To provide anti-interference ability of the circuit.
Adopt crimp terminals that make wiring become more convenient.
Instructions for use: This module is suitable for circuits containing
inductive loads and switching devices such as relays and thyristors. When
used, the two connectors of the module connect to two contacts of the relay,
or parallel with the thyristor, to avoid induced electromotive force damage
the relay or thyristor.
RC Absorption/Snubber Circuit Module only, other accessories demo in the
picture is not included!
Specification:
Dimensions: 3.1x1.3cm/1.22x0.51inch
Quantity: 1 Pc
- Note:
- 1.Transition:
1cm=10mm=0.39inch
- 2.Please allow 0-3mm error
due to manual measurement. pls make sure you do not mind before you bid.
- 3.Due to the difference
between different monitors, the picture may not reflect the actual color of
the item. Thank you!
Package includes:
- 1 x RC Absorption/Snubber Circuit Module
(without retail package)
On 28-Sep-18 at 20:53:44 AEST, seller added the following information: