Store Categories

Product Description

6V 12V 3A(Suitable for 6V/12V Lead acid/colloid battery)
Regulator
Material: Plastic
Size: 53.4*68*6*22mm
System Voltage: 6V, 12V
Output Current: 3A
Power Range: ≤60W(6V), ≤120W(12V)
Overload, Short Circuit Protection: Yes
No-load loss: ≤5mA
Charge Loop Drop: ≤0.2V
Disharge Loop Drop: ≤0.1V
Protection Degree: IP30
Working Temperature: -30°~55°

Package Included:
1* Solar Charge Controller
1*Manual


6V 12V 10A(Suitable for 6V/12V Lead acid/colloid battery)
Regulator PWM
Specification:
Brand new
Material: Plastic
System Voltage: 6V, 12V
Output Current: 10A
Power Range: ≤60W(6V), ≤120W(12V)
Overload, Short Circuit Protection: Yes
No-load loss: ≤5mA
Charge Loop Drop: ≤0.2V
Disharge Loop Drop: ≤0.1V
Protection Degree: IP30
Working Temperature: -40℃~55℃

Package Included:
1* Auto Solar Charge Controller
1*Manual


12V 10A(Suitable for 12V Lead acid/colloid battery)
Regulato
Description:
Warnings for usage:
- The batteries has stored much energy,please keep the batteries from the short circuit under any circumstances,we strongly recommend connecting the batteries with the fuse.
- Please avoid the short circuit wire and the terminal,for the wire and the terminal may generate voltage two times higher than the rated voltage of the controller.please use the insulated tools while operating the controller.
- Because of the equipment work may have a fever, please keep ventilation.The device pay attention to water，moisture，in order to avoid damage to the equipment.
Suitable range:
- The controller is only applicable to solar power, rated voltage of 12v systems, battery of gel batteries, liquid openings or sealed lead-acid batteries.
- note: specifically how much battery charge, see the product model, product can not be adapted to the various systems.
Characteristics:
- Equipped with the mcu, artificially controlled.
- Equipped with device to avoid the overcharge, over release, electronic short circuit, over loading, battery inversely connecting, solar battery inversely connecting.
- Use the battery discharge rate characteristics to correct discharge control。
- The series connection pwm circuit is implemented to form the major charging
- Make the voltage loss half of or lower than the diode charging circuit, and the charging efficiency 3%-6% higher than the non-pwm.
- The led shows the batteries current situation to make the customer get the information of the batteries.
- Three operating modes can be selected: normally open mode, the pure light control mode and light control plus timing mode.
Package Included:
1*Solar Charge Controller
1*Manual




11.1V 10A(Suitable for 18650/Polymer battery)
Specification:
- Material: Plastic
- System Voltage: 11.1V
- Output Current: 10A
- Power Range: ≤111W
- Overload, Short Circuit Protection: Yes
- No-load loss: ≤6mA
- Charge Loop Drop: ≤0.2V
- Disharge Loop Drop: ≤0.1V
- Protection Degree: IP30
- Working Temperature: -40℃~55℃

Package Included:
1*Solar Charge Controller
1*Manual



11.1V 3A(Suitable for 18650/Polymer battery)
Characteristics of the function:
Working for Li-ion battery’s charging control
Voltage: 11.1V
Current: 3A
Working temperature: -30 ℃-55℃
Equipped with the MCU, artificially controlled.
Equipped with device to avoid the overcharge, over release, electronic short circuit, over loading, battery inversely connecting, solar battery inversely connecting.
Use the battery discharge rate characteristics to correct discharge control.
The series connection PWM circuit is implemented to form the major charging circuit, make the voltage loss 50% or lower than the diode charging circuit, and the charging efficiency 3%-6% higher than the non-PWM.
The LED displayer shows the batteries current situation to make the customer get the information of the batteries.
Three operatiing modes can be selected: normally open mode, the pure light control mode and light control plus timing mode.

Package Included:
1*Solar Charge Controller
1*Manual

Above Install and Method of Using:
Firstly, determine the controller output mode , the device factory default setting is normally open mode .if you need to set for the pure light control mode or light control plus timing mode, you need to open the enclosure through set dip switch, changing the discharge mode
When the key set "on" is 1, the key set "off" is 0, normally open, pure light control
Connecting the battery first. if correctly connected, battery indicator will light
Connecting the wire of the solar panel second. if the connection is correct, the indicator light of “charge”will be on or flash 10 seconds later after laying outside under the sun. otherwise, please check the connection
Making sure the solar energy panel is laid outdoors under the sunshine
Connecting the load at the end. if inversely connected, the led lamp may be damaged
Please pay attention to the anode and the cathode to avoid the inverse connection.

We only ship to Ebay Address,Please Make sure it's 100% right.

The items you ordered will be shipped out  in 1 business day by Air Mail 

when your payment is clear. 

 

 

Country

DELIVERY TIME

Shipping time will be longer than below period due to the flight and holiday

WORKING DAYS

5-7

8-10

12-14

15-19

20-22

WORKINGDAYS+SATURDAY+SUNDAY

5-9

8-15

16-20

21-25

26-30

Australia

Rate(time arrived)

21.4%

52.1%

14.3%

7.2%

4%

United States

Rate(time arrived)

5.2%

80%

14.3%

0.5%

  

United Kingdom

Rate(time arrived)

9.9%

63.2%

19.1%

3.4%

4.4%

Germany

Rate(time arrived)

11.1%

22.2%

30.3%

20.9%

15.5%

Canada

Rate(time arrived)

2%

45.1%

31.4%

17.6%

4%

Italy,Russia

Rate(time arrived)

2.5%

10.2

18.2%

17.3%

31.3%

Spain

Rate(time arrived)

3.5%

25%

47.9%

12.9%

10.7%

Brazil , most of the south America country

Rate(time arrived)

Most package will need 4-8 weeks

Other country

Rate(time arrived)

0.5%

8.6%

15.0%

43.8%

28.1%
<!--[endif]-->
We maintain high standards of excellence FIVE STAR and strive for 100% customer satisfaction!
Feedback is very important to us.We request that you contact us immediately BEFORE you give us neutral FB or negative feedback,so that we can satisfactorily address your concerns.
 
We ensure dispatch the item within 1-2 business days. However,you bought the item from opposite side of the earth,so it needs a little longer time to delivy.Please place order only if you agree with the shipping time and all the terms below.
 
Customs duty is obligation and liability of a citizen in your country,so buyer should be responsible for any tax and custom duty incurred.
 
Generally,the delay or failure delivery is sometimes caused by the policy of different customs. For example, Laser Pointer is unacceptable insome countries. Therefore,please double check your local customs policy
carefully before purchase.
We are not responsible for any custom duty or import tax.But we will mark th parcel with low value.We will leave POSITIVE FEEDBACK after receiving the payment.
Please contact us if you are not satisfied with the item after receive it.
All messages will be answered within 1 business day. If you do not receive our reply,please kindly re-sent your message and we will reply to you as soon as possible.
Serious Buyer Only! Please place bid only if you agree with all the terms
  • Please buy with confidence. We specialize in electronic components for more than 10 years. All items will be tested before shipped. 
  • We are responsible for mail lost ,We promise you can get the items you pay or refund.All package need to wait 30 days(To USA, Only need 15days) , Please take care it.Less than 30 days 
  • We recommend tracking number . For orders more than $30. we provide free tracking number. Orders less than $30, customer can pay $3.0 for tracking number Pleas feel free to contact us if you need.
  • we can accept 14days no-question-return.If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back..

  • We greatly appreciate your POSITIVE feedback.
Please do NOT leave negative or neutral feedback without any contact.

Here you can find items with high quality and best price .

\all items will be tested before shipped. Good quality is the basic of business. we seek for long term .We mainly selling ICs, electronic component ,

electronic modules.PCB board etc

ICs,

ICs business is our basic business. We specialized in ICs for nearly 10 years.

Located in HQB electronic market in SHENZHEN China. We stock ICs ourselves. We are not trader. So you can always find a good price here ,

For Big quantity, please send message to us to get a better price .

Electronic module.

We product modules . work with many big factory directly . they are all big factory , they have QC department, have strict control on quality ,

unlike the many small factory always selling modules without tested. So we can make sure every module you buy here is with high quality. Of course.

Best price too . For Big quantity, please send message to us to get a better price .

We also accept OEM or ODM order . if you need to design an module. Please feel free to contact us .

 

PCB boards

We product module . so work with big PCB factory .

Quality is really good , and price also low price,

Please don’t hesitate to send us message for a quote, then you will find we are the right business partner you are

looking for . .

 

DataCaciques

On 18-Jan-2024 at 05:56:08 GMT, seller added the following information:

DataCaciques