Brand New
Combo Kit for Aftermarket Radio Installation in Factory Radio Location
Radio Kit, Radio Wire Harness, and Antenna Adapter
Product Details:
For select vehicles only.
Use to add an aftermarket radio to the factory vehicle wiring.
Standard wire coloring usually will connect color for color to aftermarket radio's wire harness.
Black color radio kit
Designed specifically for the installation of Single and Double-DIN radios
High-grade ABS plastic
Contoured textured and painted to compliment factory dash
Some radios will require the inside of the radio kit to be sanded/filed to make the opening a little bigger- that's normal stuff especially if the radio is an off-brand since they sometimes don't design their radios by standard Din specs.
Important Compatibility Notes:
Most vehicles require you to run a separate 12 volt ignition power wire since that wire might not be available on the factory harness.
This harness only works with regular factory audio systems- if the factory audio system is the external amplified type like Infinity, Bose, Boston Acoustics, etc then this harness is not compatible.
Will not retain some features that go through the radio like warning chimes, OnStar, rear dvd, steering audio controls, etc.- other adapters are needed for retention.
Does not retain the DIC (drive info center) readouts on some vehicles- might need to use Metra 99-3303 or 95-3303.
Compatible Vehicles:
Chevrolet:
Cobalt 2007-2010
HHR 2006-2011
Malibu 2008-2012
Pontiac:
G5 2007-2009
G6 2010
G6 (5th digit of VIN must be a J, K, or L) 2009
Solstice 2006-2009
Saturn;
Aura 2007-2009
Sky 2007-2009