You may also like
Ship from NSW,Australia,2-6 working days delivery with tracking.
EPEVER MPPT Solar Charge Controller,Tracer1206AN,Tracer2206AN.
20A/10A,12V/24V,Max 60V PV Input,with LCD display.
Battery: LiFePO4 Lithium Battery And Lead Acid Battery
Negative ground.
About this item
Negative Grounding Design and advanced MPPT control algorithm make it charging efficiency no less than 99.5%, it maximize the charging power as a way of saving the energy.
60V Max PV Input allow you connect 4 x12V solar panel connecting in series, it minimize the charging current on solar panel 's leads to save power loss.
Compatible with LiFePO4 & Li(NiCoMn)O2 Batteries, with built in preset lithium battery type, it's not require setting charging parameters for lithium batteries.
Work with both 12v battery system and 24v battery system, It allows 24V Solar Panels (or Even Higher Voltage) Charging 12v/24v Battery
Standard Modbus communication protocol with RS485 interface , it can be monitored by cellphone APP(eBox required) , PC Software and MT50 remote meter
Product Feature
MPPT tracking efficiency above 99.5%
Maximum charge conversion efficiency as high as 98%
Support lead-acid and lithium-ion batteries
Multiple load work modes
Charging power and current limitation
High-temperature charging power derating function
Standard Modbus communication protocol with RS485 interface
Real-time energy statistics
Negative Grounding Design
60V PV input allows more panels connected in series
Work with LiFePO4 Lithium Battery And Lead Acid Battery
Something you should know for Lithium Batteries Charging
1.When a lithium-ion battery is used, the system voltage cannot be identified automatically, please confirm the battery system voltage before installation.2.When you choose lithium battery as a battery type, the temperature compensate coefficient would be 0, and cannot be changed.
3.This MPPT solar charge controller can work under full load in the ambient temperature range. when the internal temperature reach 81℃, the power reduction mode will be turned on.
4.Lithium battery type can ONLY be set on a cellphone app or "solar station monitor" PC software.
Electronic protections:
• PV reverse polarity protection
• PV short circuit protection
• PV over current alarm protection
• Battery overcharge protection
• Battery over discharge protection
• Battery reverse polarity protection
• Load short circuit protection
• Load overload protection
• Overheating protection
Electrical Parameters
Model
Tracer1206AN
Tracer2206AN
System nominal voltage
12/24VDC① Auto
Rated charge current
10A
20A
Rated discharge current
10A
20A
Battery voltage range
8～32V
Max. PV open circuit voltage
60V②46V③
MPP voltage range
(Battery voltage +2V)～36V
Max. PV input power
130W/12V
260W/12V
260W/24V
520W/24V
Self-consumption
≤12mA
Discharge circuit voltage drop
≤0.23V
Temperature compensate coefficient④
-3mV/℃/2V (Default)
Grounding
Common negative
RS485 interface
5VDC/100mA
LCD backlight time
60S (Default)
①When a lead-acid battery is used, the controller hasn’t the low temperature protection.
②At minimum operating environment temperature
③At 25℃ environment temperature
④When a lithium-ion battery is used, the system voltage can’t be identified automatically.
Environmental Parameters
Working environment temperature
-25℃～+50℃(100% input and output)
Storage temperature range
-20℃～+70℃
Relative humidity
≤95%, N.C.
Enclosure
IP30
