Features:
* The gauge scale is for R32, R410A, R134A, R407C refrigerants.
* Incredible 70inch (1.75 meter) long hose.
* All fittings included to connect/maintain most Split A/C units!
Gauge scale
**Refrigeration manifolds
**2 way valves aluminium alloy manifolds with sight glass
**3pcs charging hoses with 1/4" SAE
**Length of charging hoses is 1.75 meter.
**for Refrigerant R134a equipped with automotive QC-19L & QC-19H quick coupler
**Portable plastic case packed
**Valve removal tool
**No English user manual included
+ R22 Imperial adapter
+ R22 Metric adapter
+ R410a adapter
+ R32 adapter
+ Tee fitting with depressor on the female nut end.
+ R32 cylinder adaptor with 1/4" male end (fit also other flammable refrigerant cylinders)
+ R32 adapter
+ Tee fitting with depressor on the female nut end.
+ R32 cylinder adaptor with 1/4" male end (fit also other flammable refrigerant cylinders)
+ R134a, R410a cylinder adaptor with 1/4" male end (fit also other non-flammable refrigerant cylinders)
+ All canister tap valve (silver color) (It can also be used for R600a cansiters)
+ 7/16" R600a tap valve (red color - please make sure that your canister has 7/16" thread on the canister)
+ M14 R134a tap valve (green color)
+ 1/4", 3/8", 3/16" and 5/16" square ratchet wrench
+ 4mm, 3/16", 5/16" hexagon bits + hex ratchet wrench
+ 2x soldarable access port with 1/4" male end and schrader valve fitted.
+ 2x soldarable access port with 1/4" male end and schrader valve fitted.
+ 1x bullet piercing valve with 1/4" male end
+
45º ECCENTRIC CONE FLARING TOOL KIT IN PLASTIC CASE
The clamp can handle 12 different tube sizes.
For tubes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 6mm, 8mm, 10mm, 12mm, 16mm and 19mm.
Easy operation, save time and energy. The special cone eccentric revolution will be allows the internal opening gradually and form 45º accurate and regular flare without, preventing tube slippage downward. Therefore, the flare face will be smooth, uniform without scratching.
Eccentric cone will be rebound by itself after the work is finished,make the idle top head in revolution again for 1-2 rounds and have the flare face in friction to make it prettier.
Included:
+CT274 - tube cutter for 1/8" to 1-1/8" (from 4 to 28mm)
+BT208 - Inner-Outer Reamer from 3/16" to 1-1/2" (up to 40mm inner diameter).
+
Rotary vane vacuum pump.
High Efficiency and Low Noise
Heavy-duty Aluminum Alloy Casing
With Oil Drain Plug Positioned at Bottom of Oil Reservoir
Internal High Volume Cooling Fan For Extended Use
Exhaust Port with Exhaust Cap
Direct Drive Motor Allowing Easy Starting and is Maintenance Free
Oil Sight Glass For Monitoring Oil Levels
ON/OFF Switch
Non Slip Cushion Handle
1 bottle if compressor oil is included.
SPECS:
Voltage /Frequency: 220V-240V/60HZ
UK plug
Flow Rate: 51 L/MIN (1.8 CFM)
Ultimate Vacuum: 5 Pa (0.05mbar)
RPM: 1400 RPM
Power: 1/4HP
Oil Capacity: 300 ml
Dimension: 10 1/2" x 4 1/2" x 8 1/2
1 year warranty.
* When you receive the kit please fill it with vacuum pump oil first and DO NOT run dry!
* Express shipping is available.
* Check all pictures before you place your order!
* Only purchase this kit if you are 100% how to use these tools and if you are a trained refrigeration engineer.
* We have other bundles available. Please check out our other listings.
* We ship internationally but you must contact us for cost BEFORE your order.
* Vacuum pump is tested in factory prior packing. As the pump cannot be tested without oil it is inevitable that its packing box gets oily!
* As fluids cannot be pressurised the vacuum pump's cap has a hole to allow free air inside the oil reservoir. The blue cap on the vacuum pump WILL NOT SEAL nothing! This is a fact and not a defect! If you have no clue how this pump or this system work then you MUST not deal with refrigerants and do not purchase our product!
PLEASE NOTE THAT WE ARE LOCATED IN THE UK. FROM YEAR 2021 ANY ITEMS ORDERED TO EITHER EU COUNTRY WILL REQUIRE A CUSTOMS DECLARATION ON YOUR END. COURIERS MAY CHARGE THE RECEIVER (YOU) WITH AN ADDITIONAL CUSTOMS CLEARANCE FEE. THIS CAN CAUSE DELAYS IN DELIVERY AND EXTRA COST ON TOP OF THE PURCHASE PRICE. YOUR CUSTOMS FEES AND ADDITIONAL CHARGES ARE NOT INCLUDED OUR PRICES. YOU HAVE TO SEND YOUR ENQUIRY TO YOUR COURIER SERVICE IN YOUR COUNTRY. IF YOU ARE NOT HAPPY WITH THIS THEN PLEASE DO NOT PLACE YOUR ORDER WITH US.
Please note that Ebay's estimated delivery times are WRONG and they've got not intention to fix it.
If you dont pay for next day delivery your order will be dispatched by 3-5 working days ECONOMY SERVICE.
This is always WORKING DAYS therefore no Saturdays and Sundays should be calculated with.
If you opt for Economy 3-5 WORKING day option:
1. Eg. Place your order on Monday
2. We have 1 days handling/packing/dispatching time
3. Your order will be dispatched on Tuesday (NOT SAME DAY!)
4. You can expect your parcel on Thursday Friday or next Monday
If you opt for NEXT WORKING day delivery then:
1. Eg. Place your order on Monday
2. We have 1 days handling/packing/dispatching time
3. Your order will be dispatched on Tuesday (NOT SAME DAY!)
4. You can expect your parcel on Wednesday
If you dont like the above DO NOT place your order and contact Ebay for showing you wrong estimated delivery times.