The Mechanical Thermal Switch can be used with our Thermatic Fans & EWP's. It senses the coolant temperature after it passes through the engine block prior to entering the radiator and is adjustable from 40° to 100°C (104° to 212°F). The Thermal Switch is mounted near the radiator and the stainless steel probe fitted inside the radiator hose. The Thermal Switch & relay kit enables a fan to operate both thermally and also when the air conditioning is running.
KIT CONTENTS | SPECIFICATION | |||
DESCRIPTION | UNITS | |||
Thermal Switch | 1 | Temperature Range | 40° to 100°C (104° to 212°F) | |
| Rubber Seal Suits 1mm Capillary | 1 | Lead Length | 100cm | |
| Thermal Switch Knob | 1 | Sensor Probe Size | Suites 6mm Olive | |
| 3M White Scotch lock Terminal | 1 | |||
Instructions | 1 | |||
Should you need to account for Air Conditioning, we recommend the Mechanical Thermatic® Switch(12V & 24V) plus Relay for Air Conditioning, Part #0404
24 Volt Application:
Kit sold in 12 volt configuration, for 24 volt application, you will need to purchase 24 volt relay for each electric fan.
Simply search for part 10534 in our search bar (top right-hand side of website).
Davies, Craig offers three types of Thermatic® Fan Switches
*Note: if using this switch for use with our EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP control, we would recommend the LCD Controller part number 8001 which can manage both the EWP and your Thermatic Fans.
(In the event of, Warranty claims are to be directed to Davies Craig for claim)