Remote start your vehicle off your existing factory remote!
Pre-programmed and ready to use/install right out of the box! (tool required and is included to complete the key decryptor step yourself).
This kit is compatible with the following vehicles:
Dodge Ram - Push Start - 2018-2019
4 t tap connections required for installation. (pre-plumbed for you in advance at shipping)
1 is optional for parking lights connection
REMOTES: Uses factory remote
RANGE: Same as factory remotes
Please note: A person with a good basic knowledge of
wiring 12 volt car electronics should be able to install this product
successfully - Our remote starts are ONLY compatible with AUTOMATIC
transmission vehicles. We also sell manual trans setups, Email for more
info regarding those if interested. Wire ties and t-taps are also
included to complete your installation.
Precool in the summer and preheat the vehicle in winter
Choosing the right remote start system and installing it in your
vehicle has become a lot simpler and more affordable with this
all-in-one Fortin EVO-Series package. The EVO system includes a
digital interface module, which bypasses your vehicle's immobilizer
circuits so you can start it without a key, and a T-harness that'll
connect the module to your specific vehicle.
Vehicle-specific harness simplifies the installation
While not quite plug-and-play, the harness connections cut down
installation time considerably, so you do-it-yourselfers out there can
save a little money. Fortin includes a code on the package that you use
on their website to download and print detailed, illustrated
instructions for your installation.
Use your factory remote
You start your vehicle by pressing the lock button on your factory
key three times. This system lets you start your car from as far away as
the key will lock and unlock your doors.
Optional RF remotes increase the range to 1500 feet
If you want to be able to start your car from inside your home or
office, for instance, you can extend the range of your EVO up to a
quarter mile by simply plugging in one of these RF remote kits to the
interface module.
- This is a genuine Lessco product
prewired and designed specifically for the vehicle listed. All the prep
work is done, Leaving you you more time to enjoy your new remote
starter!
- Activates from existing Factory
Remote. (VEHICLE MUST HAVE OEM KEYLESS ENTRY) Press the lock button on
the OEM Remote 3 times to activate remote start function. Free
proprietary copyrighted text style wire code sheet available upon
request, Just ask. Please note the year make and model and key/starting
method type.
- Latest firmware guaranteed, FREE Phone technical support available as well with purchase.
- Upgradable to extended range RF kits and/or drone smartphone module (if applicable).
- Printed as well as electronic
delivery of the installation guide will be sent to you after checkout.
Easy install typically 2-6 connections depending on your preferences.
Have more questions about features and functionality?
Look here: https:://fortin.ca/en/products/evo-combos/
EVO Features:
- 3x on-board LEDs for simplified programming and diagnostics.
- 1x preloaded firmware for maximum compatibility.
- 4-wire
Fortin 2-way datalink port for data-to-data (RS-232) communication with
datalink equipped remote-starters and security-systems.
- 20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
- Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly
Communication Ports
- 3x CAN-Bus controllers.
- 3x General purpose controllers (J1850, Class 2, encrypted key etc.).
- 2x On-board Relays (SPDT).
- 1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
- 1x TB control port for TB-series modules
THAR Features:
- EVO-ALL T-Harness for the vehicle
- T-Harness connectivity with EVO-ALL to your vehicle
- T-Harness connects directly at the ignition column for plug-and-play installation for remote-starter
- Some wires may still need to splice/cut to complete installtion
**
T-Harness may not complete installation and some wires may need to be
hard wired into vehicle similar to a typical car starter install.
** Check manufacturers web site to make sure your vehicle is compatible with this system
Product Features
- 3x on-board LEDs for simplified programming and diagnostics
- 1x preloaded firmware for maximum compatibility. [1]
- 4-wire Fortin 2-way datalink port for data-to-data
(RS-232) communication with datalink equipped remote-starters and
security-systems. [2]
- 20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
- Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
Frequently Asked Questions:
--** DIY BASIC INSTALLATION KNOWLEDGE REQUIREMENT **--
The
installation of this product will require wiring connections. We
provide concise directions with wire colors & locations. It is
important to note at a minimum, a person with a basic to intermediate
knowledge of wiring car electronics should be able to install this
product successfully.
What about the instructions?
The
remote start and interface module both come with installation manuals.
What other parts will I need?
None. The kit comes
with all the components you will need. The only things you'll need to
provide basic supplies like electrical tape wire ties and basic electrical tools.
How long?
A pro installer can do this in a couple of hours. Your results may vary.