A Metal Cased fully encapsulated Diode Bridge Rectifier. Rated 15A 200v piv It is recommended the bridge be secured to a suitable heat sink with currents exceeding 5 Amps. Suitable for rectifying any voltage up to 100v so it's fine for use say at 12v. Case Size 28.4mm Square x 11mm High. Height to top of Lucar = 22mm Connections are by push fit 6.3mm 1/4" Lucar (Faston) Blade Receptacles, or you can solder wires directly A bit of education when you rectify an AC voltage you end up with a DC voltage of 0.9x the AC. When you add a suitable smoothing or reservoir capacitor you end up with 1.4x the original AC voltage. |