Compatible With: |
H4 High and Low Beam Head Lights |
---|---|
Input Power: |
L/36W, H/36W |
Luminous Flux: |
L/8000LM, R/8000LM |
Voltage: |
DC 9-32V |
IP Rate: |
IP65 |
Light source model: |
3 sided CSP/ COB chips |
Beam Angle: |
360 Degrees |
Heat Control |
Aluminum shell base including Turbo cool fan Aviation aluminum 6063 Smart Efficient Cooling System, Built-In Cooling Fans For Fast Heat Dissipation |
Operating Temperature: |
-40 - +80°C The heating temperature is low- this will protect your car (Xenon working temperature up to 800 ° -1000 °, the main reason for the car ignition) |
Sealed Housing: |
Dustproof and Waterproof |
Colour Temperature: |
6500K |
Longlasting operating Life: |
>30000hrs
|
Number of Bulbs |
2 |
To Fit: |
Head Lights Kit |
Placement on Vehicle: |
Front Left, Front Right |
Product Manual with fitting instructions |
included
INSTALLATION : For video search YouTube for tittle below: Led Headlight Conversion Kit Review And InstallationUnplug the plastic wiring connector from the factory-installed bulbs and remove them Preserve them in a safe space for possible future use Remove the rubber Dust Boot/ back cover Release the retaining the metal spring and remove the halogen bulb Remove the plastic black ring shown on the photo from LED lamp (twist and pull up) and FIRST INSTALL just the plastic ring and lock it in with the retaining metal spring Put the rubber boot /cover back. When the ring is secured you can push through the LED lamp and twist so it stays it place |
Side LED Light 501 (W5W) |
2 pcs NOT included in the set |
---|
Brightness enhance up to 200%,6500k pure white,
Non-destructive and quick installation, clearer beam pattern without dazzling
100% Integrated Design, Plug and Play.
Few vehicles may require load resistors to stop flickering or fix the error message. It's not the quality problem, in such case you will need to install the decoder to avoid the error code or blinking.