Product View
Product Description
1.XH-M603 Charging Control Module 12-24V
 
Product Introduction:
1.Model:XH-M603
2.Input Voltage:DC 10-30V 
3.Display Precision:0.1V 
4.Control Precision:0.1V 
5.Output Type:direct output 
6.Voltage Tolerance:+/-0.1V 
7.Application Fields:12-24V storage battery 
8.Size;82*58*18mm
2.XH-M604 Battery Charger Control Module DC 6-60V

Product Introduction:

1.Name:numerical control battery charging control module 
2.Model:XH-M604
3.Input Voltage:DC 6-60V (max 80V)
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:direct output 
7.Voltage Tolerance:+/-0.1V 
8.Application Fields:6-60V storage battery 
9.Size:81*54*18mm
 
Using Method:
1.Set Starting Voltage:in normal display voltage state,press the button will display start charging voltage;long press for 3s the digital tube will flash;you can start or stop button to set starting up charge voltage value 
2.Set Stop Voltage:in normal display voltage state,press the button will display stoping charge voltage;long press the button for 3s the digital tube will flash;you can start or stop button to set stoping charge voltage value
3.Factory Reset:in power on state press the start/stop button at the same time,digital tube will display 888;that represents factory reset settings 

3.XH-M602  Control Battery Charging Control Module AC 220V

Product Introduction:
1.Name:numerical control battery charging control module 
2.Model:XH-M602
3.Input Voltage:AC 220V 
4.Display Precision:0.1V
5.Control Precision:0.1V
6.Output Type:output switch 
7.Voltage Tolerance:+/-0.1V 
8.Application Fields:for 3.7-120V lithium battery or storage battery 
9.Size:86*58*24mm

4.XH-M601 Battery Charging Control Board 12V
 
Product Introduction:
1.Name:12V charger power control board 
2.Model:XH-M601
3.Power Supply Voltage:13.8-14.8V 
4.Relay Operating Voltage:12.4V 
5.Relay Disconnect Voltage:14.8V
6.Voltage Tolerance:+/-0.1V
7.Voltage Detection Way:DC voltmeter 
8.Charging Type:12V storage battery 
9.Potentiometer Adjustment:RP1 RP2 
10.Size:50*32*18mm
Potentiometer Adjustment:
1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower)
2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower)

Package Included:
1PCS

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them!

1. 12 months Manufacturer’s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN
EXPIRED WARRANTY.

1. You have 7 days to contact us and 30 days to return it from the date received. If the item is in your possession more than 7 days, it will be considered used and WE WILL NOT ISSUEA REFUND OR REPLACEMENT to you. There are NO EXCEPTIONS!
Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

DataCaciques