BREMBO SINTERED
GENUINE PARTS BRAKE PADS
07BB3884

BREMBO SINTERED GENUINE PARTS BRAKE PADS 07BB3884

Brembo

Brembo has always stood for technical excellence: this fact makes us global leaders in braking systems for cars, motorcycles and commercial vehicles. For more than 50 years, they have been installing our systems on the most prestigious cars and motorcycles and they are trusted companion of the greatest drivers and riders in their thrilling adventures. They have shared victory in over 200 wolrd championships by their side. On all levels, their goal is always to further past achievements and seek out new challanges. This is the reason why the Brembo Group, whose staff is formed by 10% of specialized engineers and technicians, invest heavly in Research & Development. From the hatching concept to the final brake on the tar-mat: they closely monitor all the steps that lead to the manufacture of each single component of the braking system.
R&D, testing, production and assembly, quality control and distribution, without forgetting customer service: close monitoring of the value chain from start to finish is a guiding principle of our philosophy. They carry out all manufacturing processes in-house, as it should be for a Group that is aware of its leadership in the industry.
They think of themselves as one big team that, besides focusing on product quality, also dedicates its attention to performance, comfort and driving safety. Every new product, every article that they add to their offer is a new success, the fruit of hard work and passion born out of computerized simulations and that ends with market placement, after having brilliantly passed the most stringent of quality tests.

The secret of safe braking has a lot to do with pads.

Brembo, a world leading name in brakes, expands its catalogue with a full range of high performance pads incorporating vanguard technology designed ti improve the safety of the entire braking system. Offering a wide variety of compounds, from sintered to carbon-ceramic, and a big selection of part numbers, Brembo is able to satisfy specific needs presented by motorcycles of every kind-racing, road, off-road, street and scooter - not to mention the expectations of their riders.

The compounds

The compounds used normally in braking systems are classificabe in just two families, "Organic" and "Sintered", although the choice of one compund over another is not depending solely on the type of use: in effect, pads of different type can be used in the same field of applications.

Sintered materials: these are metallic powders, mixed with lubrificants and abrasive agents in such a way as to produce a compound tha is solidified by compacting even at high temperatures. The compound is bonded to a metal backing pate of whatever shape as part of sintered process, with no additional adhesive utilized. The metal powders determine the braking power of the pad at high temperatures. The lubrificants help to stabilize teh overall braking action, and the abrasive keep the disc cleen.

Organic materials: These are composed mainly of resin binders, metals, lubrificants and abrasives. In this instance the friction coefficient is generated bey the metals and resins, with the lubrificants and abrasives performing the functions as metioned above.

Selecting a compound: All brake pads have a typical field of application. This will depend on the different situations a brake pads has to deal with: racing - braking is optimized at high performance, road - high stability required, with brakes applied cold and at medium temperatures. Brembo has an answer to every need.

Bedding-in: this is a particulary important procedure for all compounds, and crucial for the RC compound. The pads are bedded in by applying the brakes lightly several times,leaving a pause between one squeeze and the next. This will produce the correct heating and cooling cycle needed to prepare the system. The duration of the bedding-in period depends on the type of compound: generally longer for organic compounds the for sintered.

Performance-wise, the two compounds differ significantly, as reflected in the following parameters::
Efficiency (how well the pads bites): this is an expression of average friction coefficient, and stability of frictional contact, measured against the main physical quantities by which braking is defined (speed, deceleration, temperature). It is determined via tests conducted on the bench, and on the vehicle.
Wear: this is indicates the amount of friction material removed (expressed as mm thickness, or by volume) per number of brake applications (bench test) or number of km covered (vehicle).

The functional differences between the various compounds are rempresented by the curves of friction coefficient versus operating temperature: the RC compound (Racing organic) for which temperatures of 350-450°C can be considered as reflecting normal operating conditions, has a very high friction coefficient whenhot, where as road type compounds like the SA (sintered, for road use) are designed to perform best at medium/low temperature, tipically around 300°C. This means that if SA type pads were to be used on the track, and therefore overstressed, the brakes would inevitably fade (degration of the friction coefficient): in effect, beyond a certain temperature, the pads will lose efficiency. Conversely, if Racing compounds are used on the road (with much colder discs), they will give less bite, and braking distances could be somewhat longer. Intermediate compounds salf-evidently, represent a compromise between the two basic types and will provide good overall performance in most conditions, albeit with less brilliance at the opposite extremes of the operating temperature range.

Terms of sales:

Return
Under D.LG. 22.5.1999, n. 185, the consumer has the right to terminate the contract, within 14 working days for goods from the day they are received, without any penalty and without specifying the reason.
The withdrawal must be expressed by sending, in the said period of 14 days, a registered letter with acknowledgment of receipt.
Within that period of 14 days will be returned to the sender by the buyer-supplier all goods purchased intact and in their original packaging and any manuals, without any lack.
Return fees will be charged to the consumer.
The products can be returned only if they have not been used or tested or otherwise not in condition of sale.
In no case will be accepted products with tampering with breakdowns, lack of accessories.
The right of withdrawal is not valid for those who can not be considered consumers by Italian law.
Subject to fulfillment of the above, we will refund the amount paid by the consumer within three days from the date of return of the goods by the customer.
If this amount has been paid by PAYPAL, we will direct the transfer of the amount on the account of the issuer of the payment, otherwise it will be responsibility of the purchaser promptly provide the bank on which to obtain the transfer (Cod.
IBAN and account holder).
Details:
- The law applies to product purchased in its entirety;
- The products must be returned intact and in its original packaging, complete in all its parts (including any documentation and accessories: manuals, cables, etc ...);
- The law does not apply to all products related to personal care;
- By law, the shipping costs are charged to the customer;
- Shipment traced, until receipt of the product in the place, is under the responsibility of the customer;
- If the goods are damaged during return shipping, we will notify the buyer, to enable him to file a timely complaint against the carrier of his choice and to obtain reimbursement of the value of the property (if insured);
- We are not liable in any way for damage or theft / loss of goods returned by uninsured shipments and traced;
On arrival at our facility, the product will be inspected for any damage and / or tampering not caused by transport.

Responsability
BORROZZINOMOTO is not responsible for any damage or loss, direct and / or indirect, arising from the sale of goods and services offered in the catalog published in the ebay store BORROZZINOMOTO, including delayed and / or non-delivery of the product, nor for the correspondence of goods to the specifications published in the ebay store, nor for any other event not directly attributable to BORROZZINOMOTO

Technical information
The technical information included in the ebay store BORROZZINOMOTO, is derived from information published by manufacturers of goods in our catalog. BORROZZINOMOTO, therefore, reserves the right to change / adapt the technical and dimensional product catalog, based on what will be announced by the producers, without notice.

Orders
Orders are accepted via the Internet (online), or by telephone.

Shipments
Shipments related to your orders, will be made only by express courier GLS EXECUTIVE. Any delay will be displayed via the number of shipments, at sites related Courier competence.

Prices
All prices shown on the ebay shop BORROZZINOMOTO, are intended Prices include VAT, and exclusive for sale online. Prices may be changed at any time, without notice.
Payments can be efettuati by:
PayPal: immediate, free, secured and easy to use.
Bank Transfer: 2-3 working days for confirmation.

For any information please contact us during office hours
from 09:00-13:00 to 16:00-19:00:

Borrozzinomoto - Via dei Romani 11, 81055 Santa Maria Capua Vetere (CE)