Great News!  for USA buyers ,Ship from USA warehouse, after payment, within 3-5 days for receiving products! No taxes from customs, no damage, better service, please don't hesitate!

This item includes:

            1 PC Nema 23 Stepper Motor with 185 oz-in holding torque,2A , 57BYGH420 

            1 PC Stepper Driver with 4.2A DQ542MA digital serial replacing M542,

            1 PC Power Supply 200W 24V ,8.3A ,

            1PC Breakout Board & Cable for free offering , ( can work with mach3 Software )


 

1, Stepper Motor

Technical Specifications


Part No.:                          57BYGH420  

Frame Size:                    NEMA23

Step Angle:                    1.8 degree

Voltage:                          3.6V

Current:                          2.0 A/phase

Resistance:                   1.8Ohm/phase

Inductance:                   2.5mH/phase

Holding torque:             12.6Kg-cm     132oz-in , with unipolar  (For Bipolar connecting, the holding torque is 185oz-in)

Rotor inertia:                  300 g-cm2

Detent torque:               0.4 kg-cm

Number of wire leads:  6

Weight:                            0.7KG

Length:                            56mm


 

Please tell us if you need Double shaft or single shaft, we can manufacture both for you. If you need Double shaft, please tell us your requirements for length of front and rear shaft, as well as the diameter. So that we can offer you the quite good products, thanks!

 

 

 

2, Stepper Motor Driver DQ542MA with 4.2A Current, 128 Microstep

 

DQ542MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on.

Features:

l  High performance, low price

l  Average current control, 2-phase sinusoidal output current drive

l  Supply voltage from 18VDC to 50VDC

l  Opto-isolated signal I/O

l  Overvoltage, under voltage, overcorrect, phase short circuit protection

l  15 channels subdivision and automatic idle-current reduction

l  8 channels output phase current setting

l  Offline command input terminal

l  Motor torque is related with speed, but not related with step/revolution

l  High start speed

l  High hording torque under high speed

Electrical specification:

Input voltage

18-50VDC

Input current

＜ 4A

Output current

1.0A～4.2A

Consumption

Consumption：80W；  Internal Insurance：6A

Temperature

Working Temperature -10～45℃；

Stocking temperature -40℃～70℃

Humidity

Not condensation, no water droplets

gas

Prohibition of combustible gases and conductive dust

weight

200G

 

           


3, Power Supply

 

200W / 24VDC,8.3A current


4, Breakout Board  DB25


 Description:

  • Built in DB25 male connector.
  • DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
  • DB25 Input Pin: P10,P11,P12,P13,P15.
  • DB25 GND Pin: P18-P25.
  • Power supply: +5V DC.
  • Built in C-class Optical-coupler.
  • High quality with Surface-mount Tech

We ship worldwide!


More Order quantites, more discount!!!

 

 

           Our products are mainly used in robotization, Spinning Automatization, Printing, Packing, Medica   Machine, Make-up Equipment, Communication,    Household Appliance, Water Pump, Milling Machine, Engraver Machine, CNC Routers.. etc automatic equipment of various trades.

           We ship worldwide!