This item includes:
3 PCS Nema 23 Stepper Motor dual shaft with 428oz-in holding torque,
3 PCS Stepper Driver with 4.2A DQ542MA replacing M542 ,
1 PCS Power Supply for 350W,36VDC,
1 PC DB25 Breakout Board & 1 Cable for free offering
1, Stepper Motor
Technical Specifications
Part No.: WT57STH115-0304B(57BYGH115-003B)dual shaft
Frame Size: NEMA23
Step Angle: 1.8 degree
Voltage: 6.3VDC
Current: 3
Resistance: 2.1Ohm/phase
Inductance: 9mH/phase
Holding torque: 30
Rotor inertia: 810
Detent torque:
Number of wire leads: 4
Weight: 1.55KG
Length: 115
2, Stepper Motor Driver with 4.2A Current, DQ542MA
DQ542MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with
Features:
l High performance, low price
l Average current control, 2-phase sinusoidal output current drive
l Supply voltage from 18VDC to 50VDC
l Opto-isolated signal I/O
l Overvoltage, under voltage, overcorrect, phase short circuit protection
l 15 channels subdivision and automatic idle-current reduction
l 8 channels output phase current setting
l Offline command input terminal
l Motor torque is related with speed, but not related with step/revolution
l High start speed
l High hording torque under high speed
Electrical specification:
Input voltage |
18-50VDC |
Input current |
< 4A |
Output current |
|
Consumption |
Consumption:80W; Internal Insurance: |
Temperature |
Working Temperature -10~ Stocking temperature |
Humidity |
Not condensation, no water droplets |
gas |
Prohibition of combustible gases and conductive dust |
weight |
|
3, Power Supply
350W/36VDC,9.8A
Description: