What You Can Get

1×Nature's Generator Power Pod;

1×Accessory Box;

1×35 inches expansion cable( in the top cover of the Nature's Generator Power Pod);

1×User Guide.

We have provided accessory box to install your Nature's Generator Power Pod on top of Nature’s Generator.

Dimensions and Weight

Dimensions and Weight:

18 x 12 x 15 inches;92Ib.

Smart Key:Install “Nature’s Pulse” app and plug smart key to the top USB port with Bluetooth icon on its right side.You can use the APP to monitor your Generator and store daily electricity data.

Front Panel

LCD Display:

LCD display shows the information of the system.

LCD Display Button: Press it to light up LCD display for 30 seconds.

Dimensions and Weight

Dimensions and Weight:

18 x 12 x 15 inches;92Ib.

We have provided accessory box to install your Nature's Generator Power Pod on top of Nature’s Generator.

How to Connect to Nature's Generator

There is an expansion cable in the top cover of the Nature's Generator Power Pod.Connect the expansion cable to the expansion port which on the back of the Narture's Generator.

LED Light

LED Light Button:

Press it to show the battery charge level.

LED Lights:

The first light will show green,which indicates 20% charge. The second light will show green, which indicates 40% charge, the third light will show green which indicates 60% charge and the fourth light will show green which indicates 80% charge

and finally the fifth light will show green which indicates a 100% charge.

What You Can Get

1×Power Transfer Switch;

1×Conduit;

1×Power Cord;

3×Cable Clamps;

1×Installation Manual;

1×User Manual;

Pay Attention

The Power Transfer Kit only works on 110V. It is not compatible with 220V.

To maximize the efficiency of your generator, divide appliance circuits and others requiring higher wattage between adjacent circuit selector switches of the transfer switch so that a usage balance is achieved between the opposing legs of the generator power.

Where to Install

The size of Power Transfer Switch is 13 1/4 x 8 x 4 3/4 inches. The conduit is approximately 18 inch with the clamps. It is recommended to install it in a close area to your breaker panel.