Includes:
1 x PRV Audio QS800.4 2 Ohm Full Range Car Audio Amplifier
QS Series amplifiers are all about efficient design capable of full-range frequency response at a great price!
The QS800.4 features a regulated power supply that is able to constantly deliver power and provides an unsurpassed efficiency rate of 80–90% in a small aluminum heatsink.
Channels | 4 Channel |
Rated RMS Power at 14.0 V at 2 Ohm | 4x 220 Watts |
Rated RMS Power at 14.0 V at 4 Ohm | 4x 140 Watts |
Bridged Rated RMS Power at 14.0 V at 4 Ohm | 2x 450 Watts |
The QS Series is our most recent line of full bridge high wattage amplifiers. You can count on these amplifiers to deliver incredible value for your money. QS Series 4 Channel amplifiers, also are available on QS400.4 and QS1200.4
Its wide frequency response allows you to use it in many different applications, such as subwoofers, midbass, midrange, full range speakers, phenolic drivers, titanium drivers, and super tweeters, among others. This versatile amplifier is the perfect solution for daily car audio systems.
Its small heatsink offers high fidelity sound, with precise midbass punch and crystal clear highs. This amplifier is perfect for anyone who wants to experience maximum sound quality and power at an affordable price.
This proprietary heat dissipation design will ensure a high air flow cooling fans controls its temperature to run cool on the most demanding playlists.
Impedance | 2 Ohm |
Channels | 4 Channel |
Rated RMS Power at 14.0 V at 2 Ohm | 4x 220 Watts RMS |
Rated RMS Power at 14.0 V at 4 Ohm | 4x 140 Watts RMS |
Bridged Rated RMS Power at 14.0 V at 4 Ohm | 2x 450 Watts RMS |
Average Efficiency | 82% |
Operating Voltage | 9 to 15 Volts |
Musical Current Draw | 45 A |
Minimal Power Wire Input | (OFC) 4 Gauge wires |
Built-in Crossover | Fixed HPF & LPF at 90 Hz |
Minimal Speaker Wire Output | 14 Gauge |
Frequency Response(-3dB) | 20 – 25,000 Hz |
Min. Input Sensitivity for Max. Output | 200 mV |
Signal Input | 2 Pair RCA |
Signal to Noise | >90 dB |
Protection System | High Temperature / Short circuit on Output |
Heat Sink Type | Heavy Duty Cast Aluminum |
Dimensions ( Width x Depth x Height ) | 7.98″ x 8.00″ x 2.65″ |
Weight | 4.60 Lbs |
The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.