Enhanced Category 6A LSZH U/UTP 1000ft Ethernet Cable LSZH CMR Pink cat.6A LSFROH Pure Copper
Cat6A Riser (CMR), 1000ft, LSZH Pink, 23AWG 10G 4 Pair Solid Bare Copper, Unshielded Twisted Pair (UTP), LSFROH Pure Copper Bulk Ethernet Cable
Cable 4*2*0.57 (U/UTP-cat.6A LSFROH)
Jacket FR LSZH - Low smoke zero halogen / low smoke free of halogen (LSZH or LSOH or LS0H or LSFH or OHLS or ZHFR).
p/n: 7931210
Packing: 1000 feet (305 m), plywood reel
Weight 42.8 lbs (19.4 kg)
Standard ANSI/TIA-568-C.2
Condition is New.
HIGH PERFORMANCE NETWORK CABLE.
This low smoke free of haloge riser rated cat 6A lan cable is 23 AWG with 4 pairs (8C). Suitable for 1 Gigabit and 10-Gigabit Ethernet. Bandwidth tested up to 750 MHz. Supports PoE, PoE+, and PoE++ (IEEE 802.3af/at/bt) up to 60W and 300V DC.
HASSLE FREE PACKAGING. 1000 feet (305 meters) of our ODESKABEL product has been packaged on a tangle free, easy pull reel/spool so you don’t have to worry about getting behind on your next job.
LSZH cable - Low smoke zero halogen / low smoke free of halogen (LSZH or LSOH or LS0H or LSFH or OHLS or ZHFR).
100% SOLID BARE COPPER CONDUCTORS. Pure bare copper produces a stronger signal along with better conductivity and flexibility when compared to copper clad aluminum (CCA).
FOR USE INDOORS. The blue riser rated jacket is for use in between floors, in wall, and non-plenum spaces. Help fires from spreading floor to floor in vertical installations with mild flame retardance.
CERTIFIED. Our data cables have been in compliance with ANSI/TIA 568.2-D standards, RoHS-3 compliant, IEC 61156-5 and EN 50288-11-1 certified. Fire safety: CMR, CSA FT4.
DESIGN
1) Conductor: solid bare copper, nominal diameter 0.565 mm
2) Insulation: HDPE, nominal diameter 1.08 mm
3) Pair: two conductors twisted together
Color identification of pairs:
pair 1: white-blue / blue
pair 2: white-orange / orange
pair 3: white-green / green
pair 4: white-brown / brown
4) Separator: LSZH cross-web, dimensions 4x4х0.34 mm
5) Jacket: flame retardant LSZH thermoplastic compound, thickness 1.0 mm, nominal cable diameter 7.4 mm
APPLICATION
PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s,
100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s,
Gigabit Ethernet (1000BASE-T, 1000BASE-TX), Firewire 100 Mbit/s,
2,5/5/10 Gigabit Ethernet (2.5/5/10GBASE-T), ATM LAN 1.2 Gbit/s
INSTALLATION AND OPERATION CONDITIONS
For stationary installation inside buildings, stations, structures and equipment.
Recomended operated on frequencies up to 750 MHz.
СOMPLIANCE WITH THE REQUIREMENTS
System: ISO/IEC 11801, EN 50173-1, ANSI/TIA 568.2-D
Cable: IEC 61156-5, EN 50288-11-1, ANSI/TIA 568.2-D
Fire safety: CMR, CSA FT4
MECHANICAL CHARACTERISTICS
Temperature range:
During installation -10 °C ... +60 °C
After installation -20 °C ... +60 °C
Bending radius:
During installation ≥ 8 cable diameters
After installation ≥ 4 cable diameters
Tensile stress ≤ 85 N
ELECTRICAL CHARACTERISTICS
Capacitance, pF/m - ≤ 56
Direct current resistance, Оhm/km - ≤ 85
Insulation resistance, GOhm/km - ≥ 5
Resistance unbalance, % - 2
Signal propagation velocity, s - 0,68
Propagation delay, ns/100 m - ≤ 534+36/√f
Delay shift on the frequency 100 MHz, ns/100 m - ≤ 30
Characteristic impedance in the frequency range of, Ohm:
1-100 MHz - 100±15
100-250 MHz - 100±22
250-500 MHz - 100±25
500-750 MHz - 100±27
Test voltage between cores, (DC, 2 s), kV - 2.5