3D laser marking machine can use high-quality ultraviolet laser source/optical fiber laser source/CO2 laser source with very small spot and very little heat-affected zone. The 3D laser marking machine with three-axis control technology can mark uneven surface, arc surface and other irregular parts. It is widely used in fine laser processing in the high-end market.

1) Non- contact marking: Laser marking is processed to non- mechanical "knife", can be marked on the printing surface of any regular or irregular, and marking the workpiece does not produce internal stress,ensuring the accuracy of the workpiece. No corrosion on the work surface, no "tool" wear, no poison, no pollution.

2). Permanent: The markings will not subsided for the environmental relations (touch, acid and reducing gases, high temperature, low temperature, etc.)

3). High engraving precision: laser marking machine engraving items, fine lines, minimum line width of up to 0.04mm. The markings are clear, durable and beautiful. Laser marking can meet the needs of printing large quantities of data on minimal plastic parts. For example, we can print two-dimensional barcode with higher precision and higher definition, and have stronger market competitiveness compared with the way of stamping or marking.

4). The running cost is low: the marking speed is fast and the mark is formed at once, and the energy consumption is small, so the running cost is low. Although the laser marking machine has more equipment investment than the traditional marking equipment, it is much lower from the running cost and longer lifetime.

5). High Efficiency: The laser beam controlled by the computer can move at high speed (5~7 meters per second), and the marking process can be completed in a few seconds.

6). Anti-fake: laser marking technology, carved out of the mark is not easy to imitate and change, to a certain extent, has a strong anti-fake.

1. Arbitrary surface printing

Because 3D marking can change laser focal length and laser beam position rapidly, it is possible to mark surface which can not be achieved by 2D before. After using 3D, the marking of cylinders in a certain radian can be completed at one time, which greatly improves the processing efficiency. Moreover, in real life, the surface shape of many parts is irregular, and the surface height of some parts is quite different. It is impossible to achieve 2D marking. At this time, the advantage of 3D marking will become more obvious.

2. High and low surface marking

In the current traditional 2D marking mode, the workpiece must be placed on the same plane, and the processing surface must be on the same plane, in order to achieve a one-time forming marking. Using the characteristics of 3D laser marking machine, it can realize the marking of one forming process when the workpiece has a height drop. Even on the slope, it can also maintain the consistency of the processing, so that the processing content will not be deformed and the color difference will not be formed. It greatly facilitates the carving of workpieces with three-dimensional structure, reduces the process and improves the efficiency of marking

3. Large scale engraving

3-D marking uses pre-focusing optical mode and larger X and Y axis deflection lenses, so it can allow larger laser spot, better focusing accuracy and better energy effect. If 3-D marking works with the same focusing accuracy as 2-D marking, the marking range can be wider.

4. Deep engraving

There are inherent defects in traditional 2D marking for deep carving of object surface. With the shift of laser focus in the process of carving, the laser energy acting on the actual surface of object will decrease sharply, which seriously affects the effect and efficiency of deep carving. For the traditional deep engraving method, the elevator is moved to a certain height every certain time during the engraving process to ensure the laser surface focusing well. 3D marking for deep engraving processing does not exist the above problems, which not only ensures the effect, but also improves the efficiency, and saves the cost of electric lifts.

Model	RY-F20D
Laser power	20 W/30W/50W/100W optional
Working Area	110*110mm(150*150mm / 200*200 / 300*300mm optional)
Cooling Mode	Air Cooling
Laser Wavelength	1064 nm
Marking Depth	0-2 mm (according to different power and materials)
Marking Speed	≤7000 mm/s
Repeat ability Accuracy	±0.001 mm
Marking Content	Text, pattern, date, bar code, etc
Operation System	Microsoft Windows 7/8/10/XP
Control Software	EZCAD Control Software
Graphic Format Supported	BMP, JPG, GIF, TGA, Ai, DXF, PLT, PNG, TIF, ai, DXF, DST, etc.
Unit Power	≤0.9 KW
Operation Temperature	5°C-40°C
Dimensions(L*W*H)	85 x 74 x 153 cm
Power supply requirements	110V 60Hz/ 220V 50Hz optional

Samples

Pre-sale Service

1. View our Factory.

2. Any technical questions will be answered as soon as possible.

3. Machine video for reference.

4. Free sample test.

Sale Service

1. Acceptance of equipment together with you.

2. Offer you help to make the operating instruction.

3. Any other help you need.

After-sale Service

1. 3 years warranty of laser machine, 2 years warranty of laser source.

2. Free change accessories due to quality problem.

3. Procedures via Internet and phone any time when needed.

4. Training how to install and operate.

1) Inner side waterproof film

2). Middle size foam

3). Outside plywood package with metal belt

(1) We accept Alipay, West Union, T/T, Paypal. All major credit cards are accepted through secure payment processor.

(2) Please reconfirm the shipment information: consignee/contact person, detailed address, telephone number, TAX ID. It is CIF item. The buyer should pay custom clearance cost and import taxes. EXW and FOB, DDU, DDP terms are also acceptable. We ship goods by sea to your seaport (you need to find broker to help you clear customs).

(4) If need fast shipping, please provide us your city and post code to check the shipping cost for you, our cooperated courier is DHL/TNT/EMS/UPS/FEDEX.