SAFE & SECURE SHOPPING
100% SATISFACTION GUARANTEED
FAST SHIPPING
Epever 12V/24V MPPT Solar Charge Controller Regulator Tracer4210AN Tracer3210AN

Product Description

  • 0C5BA1)L`XGE[U2QSTQ025K.png


  • Ship from NSW,Australia,2-6 working days delivery with tracking.


  • EPEVER MPPT Solar Charge Controller,Tracer-AN Series.

  • 40A/30A,12V/24VDC AUTO,

  • Max 100V PV Input

  • Battery : LiFePO4 Lithium Battery And Lead Acid Battery

  • Negative ground.


  • Package : 

  • 1xsolar controller


About this item

  • Negative Grounding Design and advanced MPPT control algorithm make it charging efficiency no less than 99.5%, it maximize the charging power as a way of saving the energy.

  • 100V Max PV Input allow you connect 4 x12V solar panel connecting in series, it minimize the charging current on solar panel 's leads to save power loss.

  • Compatible with LiFePO4 & Li(NiCoMn)O2 Batteries, with built in preset lithium battery type, it's not require setting charging parameters for lithium batteries.

  • Work with both 12v battery system and 24v battery system, It allows 24V Solar Panels (or Even Higher Voltage) Charging 12v/24v Battery

  • Standard Modbus communication protocol with RS485 interface , it can be monitored by cellphone APP(eBox required) , PC Software and MT50 remote meter


Product Feature

  • MPPT tracking efficiency above 99.5%

  • Maximum charge conversion efficiency as high as 98%

  • Support lead-acid and lithium-ion batteries

  • Multiple load work modes

  • Charging power and current limitation

  • High-temperature charging power derating function

  • Standard Modbus communication protocol with RS485 interface

  • Real-time energy statistics

  • Negative Grounding Design

  • 100V PV input allows more panels connected in series

  • Work with LiFePO4 Lithium Battery And Lead Acid Battery


Something you should know for Lithium Batteries Charging

  1. When a lithium-ion battery is used, the system voltage cannot be identified automatically, please confirm the battery system voltage before installation.

  2. When you choose lithium battery as a battery type, the temperature compensate coefficient would be 0, and cannot be changed.

  3. This MPPT solar charge controller can work under full load in the ambient temperature range. when the internal temperature reach 81℃, the power reduction mode will be turned on.

  4. Lithium battery type can ONLY be set on a cellphone app or "solar station monitor" PC software.


Electronic protections:
• PV reverse polarity protection                
• PV short circuit protection
• PV over current alarm protection            
• Battery overcharge protection                 
• Battery over discharge protection           
• Battery reverse polarity protection              
• Load short circuit protection                    
• Load overload protection
• Overheating protection


  • Model

    30A

    40A

    Nominal system voltage

    12V/24VDC auto work

    Rated  battery current

    30A

    40A

    Rated  load current

    30A

    40A

    Max. PV open circuit voltage

    100V

    Max. battery  voltage

    32V

    Max. PV input power

    390W  (12V)

    520W  (12V)

    780W  (24V)

    1040W  (24V)

    Equalize charging voltage

    Gel: 14.2V,  Sealed: 14.4V,  Flooded: 14.6V

    Boost charging voltage

    Gel: 14.2V,  Sealed: 14.4V,  Flooded: 14.6V

    Float charging voltage

    Gel /Sealed /Flooded: 13.8V

    Low voltage reconnect voltage

    Gel /Sealed /Flooded: 12.6V

    Low voltage disconnect voltage

    Gel /Sealed /Flooded: 11.1V

    Self-consumption

    ≤20mA(12V)  ≤16mA(24V)

    Grounding

    Negative ground

    Temp. compensation

    -3mV/℃/2V

    Communication Port

    RS485 / RJ45 interface

    Working temperature

    -25℃~+45℃

    Storage temperature

    -35℃~+80℃

    Humidity

    ≤95% N.C.

    Enclosure

    IP30

    Overall dimension

    228x164x55mm

    252x180x63mm

    Terminal

    10mm2

    10mm2

    Net weight

    1.2kg

    1.9kg