The Sol*Aire Vitra is a smart and stylish electric heater. With built-in WiFi connectivity, a slimline design and easy-to-use App the Vitra panel heater is ready to fit in any home or office environment.

• Smart Wi-Fi connectivity, adjust your heating from anywhere with a Smartphone or tablet
• Voice and Home assistant integration, (compatible with Alexa and Google Home devices)
  
• 7 day / 24 hour timer - program your heating to be at exactly the correct temperature when its needed
• 3 heating modes (Comfort, ECO, and Anti-Frost)
• Dynamic thermostat - quickly responds to changes in the room temperature
• Manual (via touch screen) or smart control (via app)
• Easy to install - wall mounted or portable (leg and wall brackets included)
• ERP Lot 20 compliant – energy efficient heater, economic to run
• Splash Proof - IPX4 Rated (suitable for bathrooms)
• Share devices with other users

Vitra – stylish, intuitive heating

The Vitra Wifi Electric panel heater is a smart and energy efficient solution for your home’s heating. Using the latest technology including: WiFi connectivity, timer and electric thermostat the Vitra is an energy efficient electric radiator. This makes the heater fully compliant with Lot20 regulations.

With a glass flat front panel this heater has a super modern appearance. Also, being splash proof, its perfect for every room including: bathrooms, living spaces, offices and conservatories. Available in 500W, 1000W, 1500W & 2000W power outputs, the Vitra will cover almost every room size (See our size guide for estimated heating coverage). Choose from wall mounted or portable options, both wall and leg brackets are included with the Vitra.

With WiFi connectivity you can easily control the heater with your smart phone or tablet.

---

IQ App

In the past, no matter what type of heating you’ve had, its likely its been difficult to set up and programme. However, this this is not a problem with the Vitra due to its intuitive App.

The Vitra is compatible with the Smart life and SolAire App. Using either App, you can control the heater from anywhere in the world over the internet. The App makes tasks which were previously difficult, such as setting the weekly timer, much easier.

While normal heating systems waste energy as they heat the whole home. The Vitra lets you control each heater / room individually. So energy is only used to heat the rooms you need to, preventing you from wasting money by heating spaces you don’t need to.

As the WIFI connection is built into the heater, its will connect directly to your WiFi router. (Phone needed to initially pair the devices). There aren’t any additional parts which need to be purchased or wired in. This makes the installation easier, less time consuming and cheaper. Once connected with WiFi you’ll be able to control your heating with the App from anywhere in the world.

---

Smart Control

As the Vita is compatible with the Smart life App, the heater can be controlled alongside other smart life devices.

With the Smart life App, you can integrate the heater with your Google Home or Amazon Alexa. Providing feature’s such as voice control. You can simply say phrases such as “turn heating on” and “set heater to 20 degrees”. This allows you to control the heating without lifting a finger.

---

Offline Operation

The Vitra has a control panel where you can use the heater without WiFi, providing backup if the WiFi goes offline.

From the control panel, you can select boost mode for either 1 or 2 hours. When the boost is activated, the heater will enter comfort mode. while in boost mode, the heater’s thermostat can be set between 5 and 30 degrees. After the boost has ended, the heater will revert to Eco mode.

By default is in ECO mode is locked to 15 degrees. This means that the heater remains efficient without the WiFi connection, by preventing wasted energy caused by leaving the heater on. If you connect the heater to WiFI, you can override his setting.

---

Comfort and Efficiency

Fully ERP LOT 20 and SAP 10.1 compliant, the Vitra meets the latest energy efficiency requirements.

The heater’s electronic thermostat precisely records the room’s air temperature. Maintaining the set temperature and adding more heat when required, to ensure maximum comfort. Using Oil free heating technology, the heater has an X-fin heating element. Which uses natural convection to ensure a fast warm up time.

The simple bracket system and lightweight body make our electric panel heaters a handy alternative to central heating radiators. You’ll have the heater installed in no time.

For long term peace of mind, this product is backed with a 2 year manufacturer’s guarantee.

---

---

Model	Power, W	Dimensions, mm	Heated Space, m2	Weight, kg
Vit05	500	470 x 520 x 100	6	7.5
Vit10	1000	470 x 520 x 100	12.5	7.5
Vit15	1500	470 x 650 x 100	18.75	7.5
Vit20	2000	470 x 780 x 100	25	12

Heated space figures are an estimate. More power may be required in rooms with high heat loss.

Quality Tested

• 3 pin UK Plug Fitted
• 230V
• 2 Year Guarantee (covering body work and electronics)
• Max. Surface Temperature 75°^c
• Overheat protection
• Splash proof – IPX4 rated (suitable for bathrooms)
• To connect your panel heaters, you may have to switch your router to 2.4 GHz . When the connection is complete, simply switch back to 5 GHz, if you wish.
• This heater is quiet during operation. However if you require a silent model, we recommend our ADAX NEO electric panel heaters.
• Please note, this heater can only be mounted horizontally (as shown in pictures)