2.2KW Electric Bone Crusher Feed Processer 220V

Specifications:

Voltage: 220V, single phase

Power: 2.2KW

Yield: 200-230kg / h

Rack material:  steel

Usage:  meat / chicken / bones / pepper / housbanding feed and so on

Net weight:50KG

Gross weight: 61Kg
 

Grind plate holes : 8mm (if you need to use other size, please contact us)

Inlet size: 5.1" x 3.9" (13x10cm)

Warnings 

1. It is forbidden to put your hands into the feeding port and the discharging port when the machine is switching on. Be careful of your hands when putting the material into the feeding port.

2. Keep children away from this machine.

3. Minors are forbidden to operate this machine.

4. Before using, please connect the ground wire first, then connect to the power supply. Leakage switches and circuit breakers should be installed on the power line

5. Do not screw the adjustable nut laxly or tightly when the machine is operating.

6. Please switch off the machine when you are doing maintence or cleaning.

About cleaning, do not clean the switch and electric motor with water. This will damage the machine.

7. The machine must not be idled for long in order to avoid damaging the blade. Please prepare materials in advance, once switch on the machine, you should put material into the machine immediately.

8. This machine is used to grind meat from chicken, duck, fish, beef, lam, chili, pig etc. 

There is no problem with the bones form fish, chicken, duck, but it can not be used to grind bones from beef and it also can not grind other hard bones !

Notice！！
Frozen meat needs to be thawed first before putting it in the machine

The pieces of meat should not be too large. Large pieces of meat need to be chopped into small pieces before being put into the machine for operation.