(EPEVER MPPT solar charge controller Tracer-AN 10A 20A 30A 40A 12/24V solar panel regulator negative ground

original supplier in mount waverley, vic, local warehouse supply fast shipping and local team good services. )

Local warehouse supply in Mount Waverley, Vic. Domestic fast shipping and local team good services.

Strict QC, we will strictly check every item before shipment

FREE & FAST Shipping delivery with Tracking Number

MAIN FEATURES

●Advanced MPPT technology, with efficiency no less than 99.5%

●Ultra-fast tracking speed and guaranteed tracking efficiency

●Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time

●Wide MPP operating voltage range

●High quality components, perfecting system performance, with maximum conversion efficiency of 98%

●Accurate recognition and tracking of multiple-peaks maximum power point

●International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life

●Charging power and current limitation function

●Compatible with lead-acid and lithium-ion batteries

●Battery temperature compensation function

●Real-time energy statistics function

●Overheating power reduction function

●Multiple load work modes

●The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection.

●With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various

●communication requirements in different situations.

●Monitor and set the parameters via mobile phone APP or PC software

●Full-load operation without any drop in capacity within the range of working environment temperature

●Extensive electronic protection

DETAILS AND SPECIFICATIONS

Battery and Load Wire Size:The battery and load wire size must conform to the rated current, the reference size as below:

Model	Rated charge current	Rated discharge current	Battery wire size	Load wire size
Tracer1210AN	10A	10A	4mm²/12AWG	4mm²/12AWG
Tracer2210AN	20A	20A	6mm²/10AWG	6mm²/10AWG
Tracer3210AN	30A	30A	10mm²/8AWG	10mm²/8AWG
Tracer4210AN	40A	40A	16mm²/6AWG	16mm²/6AWG

Technical Specifications

Electrical Parameters

Item

Tracer1210AN

Tracer2210AN

Tracer3210AN

Tracer4210AN

System nominal voltage

12/24VDC^① Auto

Rated charge current

10A

20A

30A

40A

Rated discharge current

10A

20A

30A

40A

Battery voltage range

8～32V

Max. PV open circuit voltage

100V^②92V^③

MPP voltage range

(Battery voltage +2V)～72V

Max. PV input power

130W/12V

260W/24V

260W/12V

520W/24V

390W/12V

780W/24V

520W/12V

1040W/24V

Self-consumption

≤12mA

Discharge circuit voltage drop

≤0.23V

Temperature compensate coefficient^④

-3mV/℃/2V (Default)

Grounding

Common negative

RS485 interface

5VDC/100mA

LCD backlight time

60S (Default)

①When a lead-acid battery is used, the controller hasn’t the low temperature protection.

②At minimum operating environment temperature

③At 25℃ environment temperature

④When a lithium-ion battery is used, the system voltage can’t be identified automatically.

Environmental Parameters

Working environment temperature	-25℃～+50℃(100% input and output)
Storage temperature range	-20℃～+70℃
Relative humidity	≤95%, N.C.
Enclosure	IP30

◆The controller can full load working in the working environment temperature, When the internal temperature is 81℃, the reducing power charging mode is turned on. Refer to P24.

Mechanical Parameters

Item	Tracer1210AN	Tracer2210AN			Tracer3210AN		Tracer4210AN
Dimension	172x139x44mm	220x154x 52mm			228x164x55mm		252x180x63mm
Mounting dimension	130x130mm	170x145mm			170x164mm		210x171mm
Mounting hole size	Φ5mm
Terminal	12AWG(4mm²)		6AWG(16mm²)	6AWG(16mm²)		6AWG(16mm²)
Recommended cable	12AWG(4mm²)		10AWG(6mm²)	8AWG(10mm²)		6AWG(16mm²)
Weight	0.57kg		0.94kg	1.26kg		1.65kg

Battery type
	Lead-acid battery	Lithium battery
1	Sealed(default)	LiFePO4(4s/12V; 8s/24V)
2	Gel	Li(NiCoMn)O2 (3s/12V; 6s/24V)
3	Flooded	User(9～34V)
4	User(9～17V/12V; 18～34V/24V)

Package include :

1 x MPPT Solar Charge Controller (10A / 20A / 30A / 40A)
1 x Temp Sensor Unit (Model:RT-MF58R47K3.81A)
1 x User Manual(English)

Specification:

MPPT solar charge Controller 10Amp Tracer1210AN

Model: Tracer1210AN
Rated charge and discharge current :10 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 130W charge for 12V battery system / 260W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)
Battery type : Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )
Battery voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Grounding : Common negative
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+50℃(100% input and output)
Temperature: -20°C -- +70°C/-4°F -- 158°F
LCD backlight time : 60S (Default)
Controller Terminals:#12 AWG(4mm2) ; Recommended Wire cable:#12 AWG(4mm2)
Dimension:172*139*44mm ; weight :0.6 KG

MPPT solar charge Controller 20Amp Tracer2210AN

Model: Tracer2210AN
Rated charge and discharge current :20 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 260W charge for 12V battery system / 520W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)
Battery type : Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )
Battery voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Grounding : Common negative
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+50℃(100% input and output)
Temperature: -20°C -- +70°C/-4°F -- 158°F
LCD backlight time : 60S (Default)
Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#10 AWG(6mm2)
Dimension:220*154*52mm ; weight :0.94 KG

MPPT solar charge Controller 30Amp Tracer3210AN

Model: Tracer3210AN
Rated charge and discharge current :30 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 390W charge for 12V battery system / 780W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)
Battery type :Lead-acid( Sealed /GEL(AGM)/Flooded);Lithium(LiFePO4/ Li[NiCoMn]O2 ); and User-defined . (AGM battery default setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )
Battery voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Grounding : Common negative
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+50℃(100% input and output)
Temperature: -20°C -- +70°C/-4°F -- 158°F
LCD backlight time : 60S (Default)
Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#8 AWG(10mm2)
Dimension:228*164*55mm ; weight :1.26 KG

MPPT solar charge Controller 40Amp Tracer4210AN

Model: Tracer4210AN
Rated charge and discharge current :40 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)
Battery type :Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )
Battery voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Grounding : Common negative
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+50℃(100% input and output)
Temperature: -20°C -- +70°C/-4°F -- 158°F
LCD backlight time : 60S (Default)
RS485 interface:5VDC/100mA
Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#6 AWG(16mm2)
Dimension:252*180*63mm ; weight :1.65 KG

[Quality Guarantee]

We have our own warehouse in mount waverley, vic, which can promise the fastest delivery speed, and offer the best logistic service for you. No matter what problems you encounter in the process of purchase or use, our strong after-sales service team will serve you wholeheartedly. Feel free to contact by eBay message.

[Usage Note]

Please read the instruction manual carefully or consult customer service to avoid damage to the new controller due to improper operation. The flooded battery must be place in a well ventilated space to avoid any possible danger or explosion. And please make sure that the positive and negative terminals of each component are wired correctly.

Contact us:

If you have any problems, we are very glad to help you. We have a professional technical team to provide you with 24/7 after-sales service. Your 100% satisfaction is our goal, and good communication is the premise of perfect service. Please get in touch with us before you make a negative comment so that the problem can really be solved. If you have any questions, you could timely send your feedback to us. We will give you a reply within 24 hours.