Features:
Model: SH58Gi000D2
Operating range : 5000~5875MHz
Channel width: 20Mhz&40Mhz&80Mhz
Supported standards: IEEE 802.11a/n, 2Tx2R
Operation mode: Bi-directional, half-duplex, time division duplex, MIMO
Connector type: To radio SMA female (hole inside). To antenna RP-SMA male (pin inside)
Output power: 1000mW (30dBm)
Input power: 0 ~ 20dBm
Transmit gain: 15 ~ 18dB
Receiver gain: 9 ~ 11dB
Noise figure: ≤3.5dB typical
Frequency response: ±1dB over operating range
Power adapter: 12V/2A DC, 100~240V
Operating temperature: -20°C to +70°C
Operating humidity: Up to 90% relative humidity
Material: Cast aluminum
LED light: Power status LED and activity status LED
Booster weight: 178g
Booster size: 8.5 x 7 x 2cm
Package weight: 500g
Package size: 21.3 x 15 x 6cm
Package included:
1 x SH58Gi1000-D2
2 x RG316 cable with SMA connectors (20cm)
2 x 6dBi omni antenna
1 x power supply (UK Plug or EU Plug)
1 x English User manual
RECOMMENDED USES
Sunhans's family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 5GHz antenna that implements an SMA-Male connector. The small footprint and low profile design makes it an ideal solution for mounting on vehicles or in other space constrained applications.
The Sunhans's 5,8GHz WiFi booster efficiently increases signal reach of any antenna by up to 200%-400%.
The Sunhans's 5,8GHz WiFi booster are been used to increase the power and/or the signal for different products like:
- Routers
- Access points
- IP cameras
- Video senders
- Profesional photo cameras
- Profesional video cameras
- R/C helicopters, planes and cars
Attention:
The power amplifier is not suitable for use in high power devices
Use
Step 01: Remove the Antenna from the Wireless Router (Access Point).
Step 02: Use this cable (RG316) to connect Amplifier 'input' port with router 'output' port: note that cable is in standard spec.
Step 03: Connect the antenna with 'output' port of Amplifier.
Step 04: Power the amplifier with the matching source adapter: DC 12V.
1. Please make sure whether item(s) you want to order is/are the right one(s) you need and we do advise that customer friends pre-contact us about relevant issue if you are not sure, to avoid possible extra waste caused by inappropriate choice.
2. Import duties, taxes and charges are not included in item price or shipping charges and Customs clearance are buyer’s responsibility. Please check with your local Customs authorities before purchase.
1. We accept direct order payment on eBay itself.
2. Bulk orders can be accepted. Products are always full in stock, or can be customized for specific requirement after communication
1. Your item(s) will be shipped out within 1-2 business days after order payment has been successfully verified on eBay platform.
2. In order for us to have PayPal seller protection, we only ship to address shown in your PayPal payment. We DO NOT ship to any other address requested by email or eBay message.
3. We will pack your item(s) carefully and safely to avoid any damage during transmit; each package has its own tracking No., which will be provided on eBay platform.
4. For ‘Standard Int'l Shipping’, default shipping will be via China Post or Hongkong Post (if package contains battery inside, default shipping will be via Netherlands Post: Hongkong->Netherlands as transit->destination country). For ‘Expedited Int'l Shipping’, default shipping will be via DHL, Fedex, Aramex or EMS, which depend on each specific case. Note that delivery times may vary, especially during peak periods.
1. We have 30 days’ warranty for money back. Refund will be issued after returning item has been received.
2. It’s buyer’s responsibility to contact us about replacement or refund issue within 30 days after defective item has been received; otherwise, we have to reject it. Buyer is responsible for return shipping cost in any cases.
3. All return items must be in original condition, in original boxes, and with all paperwork, parts and accessories; We are not responsible and do not accept any damaged return items. Buyers must pack the return item safely; Please note that your original shipping costs will not be refunded.
We are always aiming to provide you with nice products and services, as nice as we can. So if you meet with any problem or requirement, please don’t hesitate to contact us!
We are always here, just waiting for you.