eBay

Item Description

EVERBUILD MITRE FAST is a two pack system comprising an extremely high viscosity ethyl cyanoacrylate adhesive (50g) a 200ml aerosol activator. Used primarily for instant bonding (10 seconds) of wooden mitre joints, with numerous other uses.

Benefits

Flash setting formulation - bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.
High viscosity adhesive – low soak in to give greater bond strength than conventional cyanoacrylates on porous surfaces (eg wood)
Gap filling – high viscosity adhesive will fill small gaps in mitres etc (up to 0.2mm)
Economical in use.

Areas For Use

Multitude of industrial applications: Bonds MDF, wood, chipboard, rubber, plastics, Perspex, uPVC ceramics, aluminium and metals.

Ideal for all cornice and profile mitres, trims, picture frames, MDF, skirting and architrave joints, worktop end strips, PVCu trims and much more. It is particularly useful for production lines such as electronics assembly and uPVC window trim bonding.

Surface Preparation

The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure working environment has a relative humidity of 50% +.

Application

Spray one surface with activator.
Apply adhesive sparingly to other surface.
Bring together, position and hold for about 10 seconds.

Specific Data – Mitre Fast Adhesive

Base	Monomeric Ethyl cyanoacrylate
Solids	100% active
Viscosity	1,100mPas @ 20^oC.
Therm. Cond.	0.2w/k.m
Specific Gravity	1.07
Flash Point	> 83^oC
Gap Filling Cap.	Up to 0.2mm
Refractive Index	1.45 (Cured adhesive)
Dielectric STR	11-13kV/mm
Dielectric Const.	5.2 @ 1MHZ (cured adhesive)
Softening Point	165^oC
Working Temps	-20 to +80^oc

Specific Data – Mitre Fast Activator

Chemical Base	Hydrocarbon solvent
Appearance	Colourless
Viscosity	1mps @ 20^oC.
Flash Point	0^oC
Density	0.79g/cm3
Propellant	CO2

Health & Safety

Consult MSDS for full list of hazards.

Storage

Store in original unopened containers between 4 and 25^oC. Reseal immediately once used.

Protect activator from sources of ignition.

Shelf Life

Twelve months from date of manufacture in original unopened containers, depending on temperature of storage. As low temperature as possible will give maximum shelf life.