T1244 T2M Wizard Duo 200 Ladegerät
Original T2MErsatz-/Tuningteil.
- Mikroprozessor gesteuerte Lade-/Entladefunktion Eingangsspannung 11 bis 18V DC
- Für Akkus eines Outdoor oder Indoor Modell
- Kompakte Abmessungen für einen einfachen Transport
- Integrierter Lüfter
- Akkutypen und Anzahl: Ni-Cd/NI-MH 1-18 Zellen (Delta Peak) oder Li-Ion/Li-Po/LiFe 1-6 Zellen und Bleiakkus von 2 bis 20V.
- Einstellbarer Ladestrom von 0,1 bis 10A Schritte von 100mAh (200W/Ausgang).
- Einstellbarer Entladestrom von 100mA bis 5A (Schritte von 100 mA).
- Automatischer Erhaltungsladstrom von 0mAh bis 250 mAh.
- Einstellbare Spannung bei Entlade-Ende (Schritte von 0,1V).
- Delta Peak Höchstspannungserkennung. (NiCd und NIMH)
- Konstanter Ladestrom und Ladespannung (Li-Ion, LiPo, LiFe und Pb).
- Modus Lade-/Entladezyklus (Entladung und Ladung/Ladung und Entladung). 5 Zyklus insgesamt.
- 1 Rückbeleuchtete LCD Display mit zwei Linien à 16 Buchstaben.
- Schutzvorrichtungen gegen falsche Eingangsspannung, fehlerhafte Anschlüsse und Umkehranschlüsse.
- 2 integrierte Balancer dienen der Pflege und des Schutzes Ihrer Lithium Akkus (Li-Po, Li-Ion und LiFe) während des Ladevorgangs mit einer Toleranz von 5mV (beim Laden oder Entladen)
- Balancer Strom max. 250 mAh.
- 2 Anschlüsse für Temperatursensor (nicht inbegriffen)
- XH Anschlüsse für Balancer Stecker.
- Abmessungen : 20 x 17,5 x 7,3cm
- Gewicht : 880g.
Inhalt:
Auswahl:
|
Ohne Netzteil (+ 0,00 Euro)
Ideales Netzteil für Reifenheizdecken!
Das Powerbase Netzteil liefert mit 13,8 Volt den idealen und konstanten Strom für Reifenheizdecken. Damit das Powerbase Netzteil nicht überhitzt, findet sich ein 45 mm großer Lüfter auf der Rückseite. Inklusive einer T4 Al 250v Sicherung, zum Schutz vor Überspannungen.
Technische Daten:
Eingangsspannung: 190 - 240 Volt Wechselstrom Ausgangsspannung: 13,8 Volt regulierter Gleichstrom Ausgangsstecksystem: 4 mm Bananenstecker/Krokodilklemmen
Weitere Hinweise finden Sie hier unter unserer Shoprubrik "Technische Daten" (oben im Reiter zu finden). Reifenheizdecken finden Sie unter der Bestellnummer y1351/01 und y1351/02 und das preisgünstige Komplettset unter y1351/03.
Inhalt:
1 Stück
|
|
y1352 Powerbase 13,8V 20A Netzteil (+ 59,90 Euro)
Ideales Netzteil für Reifenheizdecken!
Das Powerbase Netzteil liefert mit 13,8 Volt den idealen und konstanten Strom für Reifenheizdecken. Damit das Powerbase Netzteil nicht überhitzt, findet sich ein 45 mm großer Lüfter auf der Rückseite. Inklusive einer T4 Al 250v Sicherung, zum Schutz vor Überspannungen.
Technische Daten:
Eingangsspannung: 190 - 240 Volt Wechselstrom Ausgangsspannung: 13,8 Volt regulierter Gleichstrom Ausgangsstecksystem: 4 mm Bananenstecker/Krokodilklemmen
Weitere Hinweise finden Sie hier unter unserer Shoprubrik "Technische Daten" (oben im Reiter zu finden). Reifenheizdecken finden Sie unter der Bestellnummer y1351/01 und y1351/02 und das preisgünstige Komplettset unter y1351/03.
Inhalt:
1 Stück
|
|
|
T1244 T2M Wizard Duo 200 Charger
Genuine T2M spare/option part.
- Microprocessor controlled charge/discharge function - Input voltage 11 to 18 V DC
- For batteries of outdoor or indoor models
- Integrated fan
- Battery types and cell counts: Ni-Cd/NI-MH 1-18 cells (Delta Peak) or Li-Ion/Li-Po/LiFe 1S - 6S and lead batteries from 2 to 20V.
- Adjustable charging current from 0.1 to 10A with 100mA increments (200W/output).
- Adjustable discharge current from 100mA to 5A (100 mA increments).
- Automatic trickle charge current from 0mA to 250 mA.
- Adjustable discharge cut-off voltage (increments of 0.1V).
- Constant charging current and charging voltage (Li-Ion, LiPo, LiFe and Pb).
- Charge/discharge cycle mode (discharge and charge/charge and discharge). 5 total cycles.
- 1 backlit LCD display with two lines of 16 characters each.
- Protective devices against incorrect input voltage, faulty connections and reverse connections.
- 2 integrated balancers are used to maintain and protect your lithium batteries (Li-Po, Li-Ion and LiFe) during the charging process with a tolerance of 5mV (during charging or discharging)
- Balancer current max. 250 mA.
- 2 ports for temperature sensor (not included)
- XH balancer connector.
- Dimensions: 20 x 17.5 x 7.3 cm
- Weight: 880g.
Contents:
Available variations:
|
Without power supply (+ 0,00 Euro)
Ideal power supply for tire warmers!
The Powerbase power supply delivers with 13.8 volts the ideal and constant current for tire warmers. A 45 mm cooling fan on the back keeps the Powerbase power supply running cool. Including a slow 4 A / 250v fuse for overload protection.
Specifications:
Input voltage: 190 - 240 Volts AC Output voltage: 13.8 volts regulated DC Output connector: 4 mm plug / alligator clips
For additional information pleas go to the ?Technical data? tab. Tire warmers can be found under part numbers y1351/01 and y1351/02 or save with the complete set part number y1351/03.
Contents:
1 piece
|
|
y1352 Powerbase 13.8 V/20 A power supply (+ 59,90 Euro)
Ideal power supply for tire warmers!
The Powerbase power supply delivers with 13.8 volts the ideal and constant current for tire warmers. A 45 mm cooling fan on the back keeps the Powerbase power supply running cool. Including a slow 4 A / 250v fuse for overload protection.
Specifications:
Input voltage: 190 - 240 Volts AC Output voltage: 13.8 volts regulated DC Output connector: 4 mm plug / alligator clips
For additional information pleas go to the ?Technical data? tab. Tire warmers can be found under part numbers y1351/01 and y1351/02 or save with the complete set part number y1351/03.
Contents:
1 piece
|
|
|