Power your device or project conveniently using an ATX Power supply. Easy and convenient to switch out the power supply using native ATX connections for maintenance or if power requirements change.

Screw terminal outputs for all the various supply voltages and control signals.  Additional control / standby power pins also broken out to screw terminals allowing your device / project to control the power supply directly. 

Handy if your device or project requires several power rails, ATX power supplies generally offer the following power rails:

• +3.3v
• +5v (including a separate always on 5v standby supply)
• +12v
• -12v

Has multiple ATX connectors & wide copper traces for maximising the power delivery / current handling capacity from the power supply.

Power delivery is spread across 30+ screw terminals each capable of handling 15A max current per terminal.  Please ensure your cabling is sufficiently sized for the amount of current you need, and consider running multiple cables for high power requirements to split up the load.  

Sufficient for up to 1000W of power, provided the power delivery is spread evenly across many terminals.  Also consider current capability of the power supply cabling when spreading the power delivery.  Please do not exceed the rated power of the power supply, to avoid damage to the power supply.

Switch and Power OK LED on the PCB.  Switch allows for control of the ATX PSU directly from the breakout board should you need it.  An LED on the board lights when the PWR_OK signal from the ATX PSU is asserted.

Connects to ATX supply using either the full 24 pin or 20 pin connector, 6/8 way PCI graphics connector and 4/8 way +12v connector.  Also supports 2x old style peripheral connectors like those used for HDD / CDROM drives prior to SATA Power.

Useful for projects like 12v 3D printers that can control the power supply using the PS_ON ATX signal pin, which is also available from the screw terminal.

6 Mounting holes and optional mounting plate.

Board Size: 96.5mm x 71.5mm

Board height: ~18.5mm PCB only, 26mm with optional mounting plate.

Mounting plate size: 107mm x 82mm

Online PDF Manual: https://drive.google.com/file/d/1A3ul2LIRUlpC0xBybxTprjttWBtSJI4u/view

Note: Connectors & mounting plate colours may vary depending on source of available parts.