New opened to take pictures
The package is comprised of a 3 input connector panel with a microphone XLR connector on a 4-gang Wallplate (transmitter), a control panel A/V switcher on a 2-gang wallplate (user interface) plus a remote receiver with video, audio, and serial control outputs, a serial programming cable as well as a Windows™ Software disk are also included in the package. The system also includes a complete Hall Research Model UVA-WP wallplate transmitter (other compatible UVA senders will work also). This device can be used to add audio video capability to any room. The installer need only supply the display device (such as a projector), passive 4 or 8 ohm speakers and a compatible UVA sender unit. The unit accommodates the following inputs: •Input #1: PC (VGA to UXGA) or Component (YPbPr) with Mono L+R Audio Cat5 signal from a compatible remote UVA Sender unit (UVA-2, UVA-4 etc) •Input #2: PC (VGA to UXGA) or Component (YPbPr) with Stereo Audio •Input #3: S-Video or Composite Video with Stereo Audio •Microphone Input via XLR connector or rear 3 Pin Header The VSA-32 User Interface provides individual buttons for turning the projector on/off, volume control selection, selecting the video source for display as well as a user defined ‘AUX’ button. The User Interface connects to the Connector Panel via 1 Cat5 cable, to a compatible remote UVA sender via 1 Cat5 cable and sends the selected AV to a remote receiver unit via 2 Cat5 Cables. No power supply is needed for the wall plates. The remote unit can be up to 750 ft away and has a built-in 20 Watt Stereo Amp which can drive a pair of 4 or 8 ohm speakers directly. A line output is provided for connection to an external amp if necessary. A Volume knob on the User Interface wallplate allows adjustment of the sound level of both the AV volume as well as microphone volume. The VSA-32 automatically controls projector operation (on/off and source selection) via serial commands stored in the unit by just the touch of a button.
Sto