APM2 (AA-AP23122) is a 2 x in, 4x out DSP kernel board based on high performance chip – ADAU1701. With the integrated DSP chip, APM2 can be applied to various DIY audio, commercial or industrial applications such as digital crossover, bass enhancement, loudspeakers, kiosk, etc. After connection with WONDOM programmer – ICP series, APM2 supports programming with SigmaStudio, remote control through APP or PC UI.
Easy Connection and Quick Integration
APM2 comes with a necessary demonstration firmware, so you can use it in your audio systems directly with no need of programming. A 2 x in, 3 x out Interface extension board – APM3 is provided for easy audio connection, which offers multiple kinds of interfaces, including RCA jack, 3.5mm AUX IN jack and PH-4Pos line input connector. After connection with APM3, APM2 can be easily integrated into any projects, such as Kiosk, Speaker Equalization, Active Crossovers, Digital Car Audio System, Home Theater, Karaoke, Musical Instruments and so on. APM2 and APM3 are both in 2’’ x 2’’ compact size, making them simple to be installed in any cabinet without occupation of too much space to leave enough headroom for other components.
High Performance ADAU1701
The on board fully programmable 28-/56-bit audio DSP ADAU1701 from Analog device is competent in various signal processing applications. This process can compensate for real-world limitations of speakers, amplifiers, and listening environments, providing dramatic improvements in perceived audio quality.
Four potentiometers are provided on APM2 for real time hardware control of the whole audio system for volume, gain and cut-off frequency setting.
Supporting SigmaStudio Program and Remote Control
Different applications have unlike requirements on audio as the speakers, the environment and the preference are different. To give customers better control of audio systems, Sure Electronics has released In-circuit programmers (ICP series), with connection of which, you can program DSP with SigmaStudio or remote control the system with APP or PC UI.
We have developed an APP – Miumax for remote control, with which, you can adjust volume, gain, frequency and EQ setting. PC UI is also available for different applications as digital crossover, bass enhancement, subwoofer, and so on.
Sure Electronics has provided open-sourced files for customers to start the project quickly. Please refer to the in the “Download” part.
Features - 28-/56-bit, 50 MIPS Digital Audio Processor
- Fully Programmable with SigmaStudio Graphical tool
- SNR of 100dB, THD + N of -83dB
- Hardware Adjustable with 4 potentiometer on board
- App Control Supported with WONDOM ICP3
- Powered by 5V micro USB
- 2 x 2 inches Compact PCB Size
- Speaker Equalization
- Active Crossovers
- Digital Car Audio System
- Home Theater
- Karaoke
- Musical Instruments
INTERFACE EXTENSION KIT
(AA-AA11428)
AA-AB11428 is the interface extension board specially designed to provide audio input and output interfaces for APM2. Taking customers’ common applications into consideration, APM3 works as a 2 x in, 3 x out extension board, suitable for audio 2.0 / 2.1 system. To maximumly satisfy different requirements of customers‘ projects, APM3 provides multiple kinds of interfaces, including 2 x RCA jacks, 1 x 3.5mm AUX IN jack, 2 x PH-4Pos connectors for audio input and 3 x RCA jacks, 1 x 3.5mm AUX IN jack and 2 x PH-4Pos connectors for audio output.
Easy for Installation and Integration
As APM3 offers multiple interfaces for audio input and output, it’s easy and simple to integrate APM2 and APM3 to your audio systems through cables connection. In addition, APM3 is in 2’’ x 2’’ compact size, the same size as APM2, making them simple to be installed in any cabinet without occupation of too much space to leave enough headroom for other components. Basic Information
- Board TypeBoard
- inputRCA, 3.5mm AUX, Others,
- outputRCA, 3.5mm AUX,
- Control InterfaceHardware
- Size2 x 2 inches (50.8mm x 50.8mm)
Features
- 2 x 2 inches(50 x 50 mm) Compact PCB Size
- 2 RCA input, 3 RCA output
- 1 AUX input, 1 AUX output
- 1 PH-4PIN-2MM input,
- 1 PH-4PIN-2MM output
- Powered by DSP kernel board
- Suitable for audio 2.1 system
IN-CIRCUIT PROGRAMMER FOR ADAU1701 DIGITAL SIGNAL - ICP1 (DB-DP11219) To help customers get the programming function of DSP to customize their audio projects, Sure Electronics has released self-developed In-circuit programming board – ICP series for use with products integrated with DSP, improving the playability and flexibility of the audio systems.
DB-DP11219 is the first member of ICP series, with the connection of which, customers can program through the Analog Devices, Inc., SigmaStudio™ software to write their own projects. Program through SigmaStudio
On-board self-boot EEPROM is included in ICP1 for operating the board independently of the Analog Devices, Inc., SigmaStudio™ software.
Easy for Connection and Integration
Taking the connection with APM2 and system integration, ICP1 is also in 2’’ x 2’’ compact size as APM2 and APM3. With the four screw holes, customers can stack the APM2, APM3 and ICP1 for better operation and installation. What you need to do is only one step – plug in the cables to connect ICP1 with APM2 and the PC. When connected with APM2, ICP1 would be powered by APM2 directly, with no need of an extra power supply. Basic Information - Board TypeBoard
- inputOthers,
- Control InterfaceHardware
- Size2 x 2 inches (50.8mm x 50.8mm)
Features - In-circuit Programmer for ADAU1701
- SigmaStudio Programming
- Compact Size: 2'' x 2''
- Easy Connection and Integration
Specification 
WONDOM IN-CIRCUIT PROGRAMMER WITH BLE BLUETOOTH FOR APP CONTROL - ICP3
DB-DP11224 To help customers get the programming function of DSP to customize their audio projects, Sure Electronics has released self-developed In-circuit programming board – ICP series for use with products integrated with DSP, improving the playability and flexibility of the audio systems.
DB-DP11224 is one of the members of ICP series, with the connection of which, customers can program through the Analog Devices, Inc., SigmaStudio™ software to write their own projects. In addition, ICP3 is integrated with Bluetooth BLE, therefore, it supports APP control of the DSP. Sure Electronics has developed an APP “Miumax” for control of the audio systems with DSP.
Program through SigmaStudio
On-board self-boot EEPROM is included in ICP3 for operating the board independently of the Analog Devices, Inc., SigmaStudio™ software.
APP control
With the built-in Bluetooth BLE, ICP3 supports APP control of the audio systems, through which, customers can get functions as volume adjustment, gain control, cut-off frequency setting and EQ setting, suitable for Speaker Equalization, Digital Crossover and Bass Enhancement applications. Simple and brief interface and the ease of operation are very user-friendly. Even the customers who are not so familiar with programming can operate easily to customize their audio projects.
Easy for Connection and Integration
Taking the connection with APM2 and system integration, ICP3 is also in 2’’ x 2’’ compact size as APM2 and APM3. With the four screw holes, customers can stack the APM2, APM3 and ICP3 for better operation and installation. What you need to do is only one step – plug in the cables to connect ICP3 with APM2 and the PC. When connected with APM2, ICP3 would be powered by APM2 directly, with no need of an extra power supply.
Basic Information - Board TypeBoard
- inputBluetooth,
- outputALL,
- Control InterfaceHardware
- SizeOthers
Features - In-circuit Programmer for ADAU1701
- Bluetooth BLE
- APP control of WONDOM DSP Products
- Programming WONDOM Products with SigmaStudio
- On-board Self-boot EEPROM
- Compact Size: 2'' x 2''
- Easy for Connection and Integration
Specification
IN-CIRCUIT PROGRAMMER WITH UART FOR PC UI CONTROL & BLE FOR APP CONTROL - ICP5 (DB-DP11226)
Notice: There is only a PC UI for use with JAB2v2 now. We are working hardly to promote the release of PC UI for other products. Since ICP5 supports online firmware update, even if you buy it now, and there is other PC UI released in future, you can update the firmware at home with one click.
If you mind this, please do not place an order now.
WONDOM ICP5 is a new member of WONDOM ICP series, integrated with USB UART for PC UI Control & Bluetooth BLE for APP Control. It is designed to help customers, even those who are not familiar with SigmaStudio, to get a simple and quick start of remote control and simple programming like EQ for their audio systems.
ICP5 is a multiple purpose programming board for use with WONDOM products integrated with DSP, providing various functions as programming with SigmaStudio, APP control and PC UI control. In addition, ICP5 supports online Firmware Upgrade by yourselves for future use with more products . Owing to the equipped auto-identification system, ICP5 can recognize the target products automatically once they are connected. Program through SigmaStudio
On-board self-boot EEPROM is included in ICP5 for operating the board independently of the Analog Devices, Inc., SigmaStudio™ software.
PC UI Control
With the equipped USB UART, customers can get PC UI function of their audio systems after connection with ICP5, where you can adjust the frequency, volume, gain, 3D, EQ and other parameter to get desired audio effects. For now, we only have PC UI for use with JAB2v2. We are working hardly to promote the release of PC UI and they will be released in succession. Since ICP5 supports online firmware update, you can update the firmware for other products at home with one click, which is rather easy and convenient.
APP Control
ICP5 is integrated with Bluetooth BLE, which supports signal communication, that create possibility for APP control of WONDOM products with DSP. There is no APP available for use with ICP5 now. We will work on the development of APP after all the PC UIs are released.
Online Firmware Update
ICP5 supports online firmware update, which makes it suitable for use with all products. You just need to update the firmware with one click at home if you want to use it with a different product. Basic Information - Board TypeBoard
- inputOthers,
- outputALL,
- Control InterfaceUI
- Size2 x 2 inches (50.8mm x 50.8mm)
- Power Voltage5V
Features - Multiple Purpose Programmer
- Supporting All WONDOM Products That are Integrated with DSP
- SigmaStudio Programming
- UART for PC UI Control
- Bluetooth for APP Control
- Online Firmware Upgrade
- Remote Control of Audio Systems
Specification |
