Product View
Product Description

1.Description:

 

The differential amplifying circuit utilizes the symmetry of the circuit parameters and the negative feedback to effectively stabilize the static operating point, and amplifies the differential mode signal to suppress the common mode signal. It is widely used in the input stage of the direct coupling circuit and the measuring circuit.

 

2.Features:

 

1>.Support dual work module;

2>.High quality sound quality;

3>.Support dual output;

4>.Support high temperature protection.

 

3.Parameters:

 

1>.Product Name:NS4110B Differential Amplifier Board

2>.Working Voltage:DC 6.0V-14.0V

3>.Output Power:7W/10W/18W

3.1>.7W (Class D , 7.4V 4ohm ,THD=10%)

3.2>.10W (Class D , 9V 4ohm ,THD=10%)

3.2>.18W (Class D , 12V 4ohm ,THD=10%)

4>.Amplifier level:Class D/Class AB

5>.Default Mode:Class D

5>.Support Speaker Impedance:4ohm

6>.Working Temperature range:-20℃~85℃

7>.Working Humidity range:0%-95%RH

8>.Size:21*21*3mm

 

4.Set Working Mode:

 

1>.The default mode is Class D.

2>.User can use CTRL pin to set work mode.

3>.Remove resistor R6 and R7 to change Class D to Class AB.

4>.CTRL pin is used connect to MUTE pin from Bluetooth module.

5>.Note:The chip will get heat which will cause the over-temperature protection function to be activated when input voltage is higher than 12V and working in Class AB mode.

6>.Correspondence between work mode and voltage from CTRL pin:

N.O

Voltage from CTRL Pin

Work Mode

1

0.0~0.5V

Low power mode

2

0.9V~1.6V

Class AB

2

2.0V~5.0V

Class D

 

   

5.Using Steps:

 

1>.Make sure work mode;

2>.Connect the suitable speakers;

3>.Connect right input voltage at input terminal;

4>.Input audio signal;

5>.Test and use.

 

6.Note:

 

1>.Default Class D.

2>.The chip will get heat which will cause the over-temperature protection function to be activated when input voltage is higher than 12V and working in Class AB mode.

3>.Please use suitable speaker.

4>.Please input audio signal.

 

7.Application:

 

1>.DIY speaker;

2>.Voice intelligent control;

3>.Bluetooth signal conversion.

 

8.Package:

 

1>.1pc NS4110B Differential Amplifier Board;

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them!

1. 12 months Manufacturer’s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN
EXPIRED WARRANTY.

1. You have 7 days to contact us and 30 days to return it from the date received. If the item is in your possession more than 7 days, it will be considered used and WE WILL NOT ISSUEA REFUND OR REPLACEMENT to you. There are NO EXCEPTIONS!
Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product(s) is (are) not as advertised.

DataCaciques