DIY Composite Supplies - the original & largest supplier of fibreglass materials on eBay
|
TR-108 Mold Release Wax 400gm (FREE FREIGHT)
This product when packed weighs 400grams
TR-108 Release Wax - For fibreglass application, specially formulated to provide the maximum number of releases per application. A versatile high carnauba content mold release paste wax with excellent sealing properties for composite molding applications.
PRODUCT FEATURES:
High carnauba wax content producing hard high gloss film – excellent for breaking in new molds Non-silicone - good tape adhesion for use where masking is required Effective in preventing/reducing pre-release on large tools, plugs & heavy laminates Excellent at eliminating troublesome gel coat fisheyes
PHYSICAL PROPERTIES: Dry Time: 5-10 minutes @ 720 F. Will vary depending on working temperature. Wax Melting or Softening Point: 185 deg F
USES: As a release agent for composite molding on all FRP tooling, metal and other hard surface molds. Open mold hand or spray lay up Resin Transfer/injection (RTM) & (RIM) Vacuum bag and compression molding Polyester & epoxy resins
APPLICATION: Apply TR-108 with sponge applicator in thin even circular motion to the mold or pattern surface working in small 3’ x 3’ overlapping sections. Polish wipe applied wax while still slightly soft or wet to gloss finish frequently rotating cloth (do not allow wax to set). For new or reconditioned molds apply a minimum of 6 coats of paste wax, waiting approx. 30-60 minutes between applications for the wax to harden after the polish wipe. Best results obtained if after application mold is allowed to stand overnight and a subsequent final coat of wax release applied following day prior to gel coating. Follow with a coat of wax for the first 2-3 parts released. Then determine how many parts can be effectively produced before re-waxing is required. This will vary depending on molding condition, configuration, resin, mold cycles, effective cure of production gel coat and other factors. Other Products available: Mold Release Wax Regular PVA Release Agent Gelcoat Acetone
|
We prefer paypal payment but also accept bank deposit
For Dangerous Goods / Non free freight items - Please use Buy It Now, not the shopping cart. You can then request a total so we can invoice you (including freight charges - see Freight Charge tab).
For bank deposit - Commonwealth Bank. BSB - 062827 - Account - 10227187 (Consolidated Coatings - Des wages). Please eBay message to let us know if paying by bank deposit.
Q. How much will my freight cost?
A. Items with FREE FREIGHT in the TITLE when sent on their own within Australia will cost zero! Nothing! Free!
We know that you will understand that the cost of freight to distant or remote areas in some cases is more expensive than the item itself. As such a surcharge for transport sometimes has to be applied to cover the long distances or remote areas of Queensland, NT and Western Australia and some other places. We will contact you if you are in one of these areas and advise of the surcharge and can even send you an invoice for this surcharge prior to sending the goods.
NON Free Freight items are Dangerous goods or bulky items so will be sent by a courier and cannot go to a PO Box. They will incur a freight charge. Due to increasing Dangerous Goods freight prices, please email us for a freight quote. Please include items required, postcode and suburb.
We request you leave a phone number for the courier.
Delivery is not available on weekends or public holidays. Please allow up to 14 working days for delivery, after the proof of payment is received. Please make payment within 3 working days of purchase, or sale may be cancelled.
Goods will be sent by Australia Post or Courier, at our discretion. If one method is preferred or cannot be used, please email to confirm freight costs, and make a note on the sale.
*****FIVE STARS REALLY DO MATTER*****
Four stars are nice but eBay only rewards those sellers who receive five stars in all categories! If for ANY reason, you feel you did not receive 5 star service in all categories, please contact us before leaving feedback and give us the opportunity to EARN it from you. Rest assured you are our most valued asset and we will go that extra mile for your satisfaction. We want you to be our HAPPY customer :)
For technical advice on our products, please view our FAQ and Technical Help Page (From our eBay storefront)
You can contact us through eBay messages, or send us an email
Don't forget to 'Like' us on Facebook - DIY Composites
DIY Composite Supplies - the original & largest supplier of fibreglass materials on eBay
|
TR-108 Mold Release Wax 400gm (FREE FREIGHT)
This product when packed weighs 400grams
TR-108 Release Wax - For fibreglass application, specially formulated to provide the maximum number of releases per application. A versatile high carnauba content mold release paste wax with excellent sealing properties for composite molding applications.
PRODUCT FEATURES:
High carnauba wax content producing hard high gloss film – excellent for breaking in new molds Non-silicone - good tape adhesion for use where masking is required Effective in preventing/reducing pre-release on large tools, plugs & heavy laminates Excellent at eliminating troublesome gel coat fisheyes
PHYSICAL PROPERTIES: Dry Time: 5-10 minutes @ 720 F. Will vary depending on working temperature. Wax Melting or Softening Point: 185 deg F
USES: As a release agent for composite molding on all FRP tooling, metal and other hard surface molds. Open mold hand or spray lay up Resin Transfer/injection (RTM) & (RIM) Vacuum bag and compression molding Polyester & epoxy resins
APPLICATION: Apply TR-108 with sponge applicator in thin even circular motion to the mold or pattern surface working in small 3’ x 3’ overlapping sections. Polish wipe applied wax while still slightly soft or wet to gloss finish frequently rotating cloth (do not allow wax to set). For new or reconditioned molds apply a minimum of 6 coats of paste wax, waiting approx. 30-60 minutes between applications for the wax to harden after the polish wipe. Best results obtained if after application mold is allowed to stand overnight and a subsequent final coat of wax release applied following day prior to gel coating. Follow with a coat of wax for the first 2-3 parts released. Then determine how many parts can be effectively produced before re-waxing is required. This will vary depending on molding condition, configuration, resin, mold cycles, effective cure of production gel coat and other factors. Other Products available: Mold Release Wax Regular PVA Release Agent Gelcoat Acetone
|
We prefer paypal payment but also accept bank deposit
For Dangerous Goods / Non free freight items - Please use Buy It Now, not the shopping cart. You can then request a total so we can invoice you (including freight charges - see Freight Charge tab).
For bank deposit - Commonwealth Bank. BSB - 062827 - Account - 10227187 (Consolidated Coatings - Des wages). Please eBay message to let us know if paying by bank deposit.
Q. How much will my freight cost?
A. Items with FREE FREIGHT in the TITLE when sent on their own within Australia will cost zero! Nothing! Free!
We know that you will understand that the cost of freight to distant or remote areas in some cases is more expensive than the item itself. As such a surcharge for transport sometimes has to be applied to cover the long distances or remote areas of Queensland, NT and Western Australia and some other places. We will contact you if you are in one of these areas and advise of the surcharge and can even send you an invoice for this surcharge prior to sending the goods.
NON Free Freight items are Dangerous goods or bulky items so will be sent by a courier and cannot go to a PO Box. They will incur a freight charge. Due to increasing Dangerous Goods freight prices, please email us for a freight quote. Please include items required, postcode and suburb.
We request you leave a phone number for the courier.
Delivery is not available on weekends or public holidays. Please allow up to 14 working days for delivery, after the proof of payment is received. Please make payment within 3 working days of purchase, or sale may be cancelled.
Goods will be sent by Australia Post or Courier, at our discretion. If one method is preferred or cannot be used, please email to confirm freight costs, and make a note on the sale.
*****FIVE STARS REALLY DO MATTER*****
Four stars are nice but eBay only rewards those sellers who receive five stars in all categories! If for ANY reason, you feel you did not receive 5 star service in all categories, please contact us before leaving feedback and give us the opportunity to EARN it from you. Rest assured you are our most valued asset and we will go that extra mile for your satisfaction. We want you to be our HAPPY customer :)
For technical advice on our products, please view our FAQ and Technical Help Page (From our eBay storefront)
You can contact us through eBay messages, or send us an email
Don't forget to 'Like' us on Facebook - DIY Composites