Technical Specifications The Converter conforms to the following standards:

Standards: IEEE802.3u Fast Ethernet 10/100Base-TX and 100Base-FX

Connectors (RJ45-UTP and Fiber SC or ST)

>Multi-mode: RJ-45 and SC/ST Connector

>Single-mode: RJ-45 and SC Connector

LED: POWER, FX 100, FX Link/Act, TX Fdx,TX Link/Act, TX 100.

Data Transfer Mode :10/100Mbps

Duplex Mode: Full or Half Duplex Mode

Power Requirement : AC 100-260v DC 1A@+5V

Ambient Temperature: 0 ～ 70℃

Humidity: 5% to 90%

Dimensions: External Power 26 x 71 x 97mm (H xW x D)

Cable: UTP Cat. 5 UTP cable

Your Fiber Media Converter carton should contain the following items:

 10/100M Fiber Media Converter

 AC-DC Power Adapter

 This User's Guide

Please notify your sales representative immediately if any items are missing or damaged.

The 10/100Base-TX to 100Base-FX Fast Ethernet Converter is fully,

*Multi-mode: SC/ST Fiber Connector

*Single-mode: SC/FC/ST Fiber Connector

*Single-mode Single Fiber: SC Fiber Connector

Six LEDs display instant status monitoring for Power, TX Fdx, FX (Link/Act), Tx (Link/Act), Fx100, Tx 100.

3. Installation

Please follow the procedure outlined below:

 Turn off the power of the device/station in the network in which the Media Converter will be installed.

 Ensure that there is no activity in the network.

 Attach fiber cable from the Converter to the fiber network. The fiber connections must be matched-- transmit socket to receive socket.

 Attach a UTP cable from the 100Base-TX network to the RJ-45 port on the Converter.

 Connect the power cord to the Converter and check that the Power LED lights up. The TP