Pedal Preload Spacer x2 (G27, G29, G920, G923)

Made in The UK

Make your throttle and clutch have more resistance with this mod!

Place the spacer in the recess for the original spring and it will give the spring more preload, thus giving a firmer feel to your pedals.

Each package contains:

1x Throttle Spacer

1x Clutch Spacer

This mod is printed in Carbon Fibre PLA at a which means it has 20% Carbon Fiber particles in the plastic to give it excellent strength and longevity. It also will not 'stretch' over time which normal PLA does.

Installation difficulty 3/5

1. Turn over the pedal box to reveal the underside 
2. Remove the 12 silver screws ( two are hiding under the carpet slider)
3. Remove the two upper allen key bolts at each side of both the clutch and throttle
4. Pull back the black casing and lift off then remove the spring
5. Place the preload spacer into the recess and make sure it's seated correctly
6. Replace the spring and re-assemble 

If you require any more information or help getting set up please send us an email and we will get back to you within one working day.