Gray PVC-U Pipe Adhesive Fittings Sleeve Elbow Tee Cross Reducer Ball Valve Cap
The tube wall is thickened and the inside and outside surfaces are smooth and flat. The coefficient of friction is small, the water flow is even, it is not easy to block and the maintenance is low.
Odor-proof ， Corrosion-resistant ， It is less sensitive to temperature and resistant to high and low temperatures. Good resistance to aging, normal lifespan can reach more than 10 years. Excellent surface hardness and tensile strength, high safety factor.
The construction is simple, the operation is convenient and the installation efficiency is high.
Color : Gray (there may actually be a color difference)
Material : environmental protection not plasticized polyvinyl chloride (UPVC) (PVC-U)
● Model : Cap
- It is normally used in the mouth of the PVC pipe to prevent dust and foreign objects from falling into the drain pipe.
- Size ： 20 - 200 mm （For detailed dimensions, please see the picture.）
The 20 mm cap is suitable for pipes with an outer diameter of 20 mm.
The 25 mm cap is suitable for pipes with an outer diameter of 25 mm.
The 32 mm cap is suitable for pipes with an outer diameter of 32 mm.
The 40 mm cap is suitable for pipes with an outer diameter of 40 mm.
The 50 mm cap is suitable for pipes with an outside diameter of 50 mm.
The 63 mm cap is suitable for pipes with an outside diameter of 63 mm.
The 75 mm cap is suitable for pipes with an outer diameter of 75 mm.
The 90 mm cap is suitable for pipes with an outer diameter of 75 mm.
The 110 mm cap is suitable for pipes with an outside diameter of 110 mm.
The 125 mm cap is suitable for pipes with an outside diameter of 125 mm.
The 160 mm cap is suitable for pipes with an outside diameter of 160 mm.
The 200 mm cap is suitable for pipes with an outer diameter of 200 mm.
- Connection method: Adhesive connection （Apply adhesive to the inside of the PVC pipe connectors and the outside of the pipe and insert it within a minute. Install and fix it for 15 minutes, have a certain strength after 2 hours and let water through after 24 hours. This is the best effect.）
- Size ： 20 - 200 mm （For detailed dimensions, please see the picture.）
The 20 mm cap is suitable for pipes with an outer diameter of 20 mm.
The 25 mm cap is suitable for pipes with an outer diameter of 25 mm.
The 32 mm cap is suitable for pipes with an outer diameter of 32 mm.
The 40 mm cap is suitable for pipes with an outer diameter of 40 mm.
The 50 mm cap is suitable for pipes with an outside diameter of 50 mm.
The 63 mm cap is suitable for pipes with an outside diameter of 63 mm.
The 75 mm cap is suitable for pipes with an outer diameter of 75 mm.
The 90 mm cap is suitable for pipes with an outer diameter of 75 mm.
The 110 mm cap is suitable for pipes with an outside diameter of 110 mm.
The 125 mm cap is suitable for pipes with an outside diameter of 125 mm.
The 160 mm cap is suitable for pipes with an outside diameter of 160 mm.
The 200 mm cap is suitable for pipes with an outer diameter of 200 mm.
- Connection method: Adhesive connection （Apply adhesive to the inside of the PVC pipe connectors and the outside of the pipe and insert it within a minute. Install and fix it for 15 minutes, have a certain strength after 2 hours and let water through after 24 hours. This is the best effect.）
● Model : Sleeve，Tee 90 °， Tee 45°， 90° Elbow，45° Elbow，Cross sleeve ， 3/4/5/6-way Bend，Reducer Sleeve，Reducer Tee，Reducer 90° Elbow
- This pipe fitting is suitable for drinking water pipes, sewer pipes, swimming pool pipes, aquarium pipes, pond systems and much more. It can be installed above ground and underground, mounted on the wall or in an empty pipe.
- Size ： 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110 mm ， 125 mm ， 160 mm ， 200 mm （For detailed dimensions please see the picture.）
- The specified size of the PVC fittings such as Elbow, Tee, cap, or Sleeve in 20, 25, 32, 40, 50, 63, 75, 90, 110, 125, 160, 200mm always refers to the inside diameter.
- Connection method: Adhesive connection （Apply adhesive to the inside of the PVC pipe connectors and the outside of the pipe and insert it within a minute. Install and fix it for 15 minutes, have a certain strength after 2 hours and let water through after 24 hours. This is the best effect.）
● Model : Sleeve x Male Thread , 90°Elbow x Female Thread
- This pipe fitting is suitable for drinking water pipes, sewer pipes, swimming pool pipes, aquarium pipes, pond systems and much more. It can be installed above ground and underground, mounted on the wall or in an empty pipe.
- Socket end inner diameter ： 20 mm ， 25 mm ， 32 mm ， 40 mm ， 50 mm ， 63 mm (The specified size of the PVC fittings such as Elbow , Tee, Cap, or Sleeve in 20, 25, 32, 40, 50, 63, 75, 90, 110, 160, 200mm always refers to the inside diameter.)
- Female Thread end size： PT 1/2 inch ， PT 3/4 inch ， PT 1 inch ， PT 1-1 / 4 inches ， PT 1-1 / 2 inches ， PT 2 inches
- More detailed dimensions can be found in the window picture.
- Connection method: The socket end is glued to the pipe material and the threaded end is screwed to the pipe fitting. （Apply adhesive to the inside of the PVC pipe connectors and the outside of the pipe and insert it within a minute. Install and fix it for 15 minutes, have a certain strength after 2 hours and let water through after 24 hours. This is the best effect.）
● Model : Ball Valve Sleeve
- The opening and closing torque is low and the switch is light. The handle is humanized and comfortable to hold.
- This PVC ball valve is suitable for drinking water pipes, sewer pipes, swimming pool pipes, aquarium pipes, pond systems and much more. Mainly used to block or connect the medium in the pipeline （switch control）
- Size (inner diameter) ： 25 mm ， 32 mm ， 40 mm ， 50 mm ， 63 mm ， 75 mm ， 90 mm ， 110 mm
- Please refer to the picture for detailed dimensions.
- Connection method: Adhesive connection （Apply adhesive to the inside of the PVC pipe connectors and the outside of the pipe and insert it within a minute. Install and fix it for 15 minutes, have a certain strength after 2 hours and let water through after 24 hours. This is the best effect.）
● Model : Female thread Ball Valve
- The opening and closing torque is low and the switch is light. The handle is humanized and comfortable to hold.
- This PVC ball valve is suitable for drinking water pipes, sewer pipes, swimming pool pipes, aquarium pipes, pond systems and much more. Mainly used to block or connect the medium in the pipeline （switch control）
- Size (Female thread) ： 1/2 inch (DN15) ， 3/4 inch (DN20) ， 1 inch (DN25) ， 1-1 / 4 inch (DN32) ， 1-1 / 2 inch (DN40) ， 2 inch (DN50) ， 2-1 / 2 inch (DN65) ， 3-inch (DN80) ， 4 inch (DN100)
- Please refer to the picture for detailed dimensions.
- Connection method: threaded connection ， The female thread end is screwed to the pipe fitting.
● Model : Sleeve x Hose Nozzle
- This pipe fitting is suitable for drinking water pipes, sewer pipes, swimming pool pipes, aquarium pipes, pond systems and much more. One end is connected to the pipe fitting and the other end to the hose.
- Size (Adhesive sleeve outer diameter x Hose nozzle outer diameter) ：
20 mm x 5 mm ， 20 mm x 8 mm ， 20 mm x 10 mm ， 20 mm x 12 mm ， 20 mm x 14 mm ， 20 mm x 16 mm ， 20 mm x 18 mm ， 25 mm x 12 mm ， 25 mm x 16 mm ， 25 mm x 20 mm
- Please see the window image for more detailed dimensions.
● Model : Male Thread x Hose Nozzle
- This pipe fitting is suitable for drinking water pipes, sewer pipes, swimming pool pipes, aquarium pipes, pond systems and much more. One end is connected to the pipe fitting and the other end to the hose.
- Size (external thread x hose nozzle outer diameter) ： 1/2 inch x 8 mm ， 1/2 inch x 10 mm ， 1/2 inch x 12 mm ， 1/2 inch x 16 mm ， 3/4 inch x 12 mm ， 3 / 4 inches x 16 mm
- Please see the window image for more detailed dimensions.
- Connection method: threaded connection ， The external thread end is screwed to the pipe fitting.
● More pipe fittings of different colors, sizes and shapes can be found in our shop!
● Support other quantity and size customization, can be provided in a short time, please consult!
● Note:
- Please allow minor errors due to manual measurement. Thank you for your comprehension.
- Monitors are not calibrated, the element color shown in the photos may differ slightly from the real object. Please take the real one as standard.
Package included : 1Pcs x Pipe fitting (According to your choice)
